Post Stock Login Register

ASTM A588 vs CSA G40.21 480A

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

ASTM A588 (ASTM A588) and CSA G40.21 480A (CSA G40.21-13 (R2023)) are both steel grades. Both fall under the Structural Steel (Corten / Weathering) category. ASTM A588 is typically used for used for bridges, railway wagons, transmission poles, architectural structures, containers, and outdoor construction., while CSA G40.21 480A is commonly used for high-strength atmospheric corrosion-resistant (weathering) structural steel; heavy exposed structural members, bridge girders. ASTM A588 is defined under ASTM International, originating from United States, while CSA G40.21 480A is defined under Canadian Standards Association (CSA), originating from Canada.

As per chemical composition, ASTM A588 vs CSA G40.21 480A is a 80.7% match. As per mechanical properties, the match is 1.2%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With ASTM A588:
EN 10025-5 S355J2W CSA G40.21 350A ASTM A588 Grade A AS/NZS 3678 Grade 350WR EN 10025-5 S355J0WP JIS G3114 SMA400 CSA G40.21 260WT EN 10025-5 S355J2WP CSA G40.21 50W ASTM A588 Grade B ASTM A709 Grade HPS 70W EN 10025-5 S235J2W
Match Breakdown
CHEMISTRY MATCH
80.7%
MECHANICAL MATCH
1.2%
OVERALL
35%
Specifications
Property ASTM A588 CSA G40.21 480A
Standard ASTM A588 CSA G40.21-13 (R2023)
Category Structural Steel (Corten / Weathering) Structural Steel (Corten / Weathering)
C (%) 0.19 max <=0.23
Mn (%) 0.80-1.25 <=1.60
Si (%) 0.30-0.65 <=0.40
Cu (%) 0.20-0.40 0.20-0.40
Cr (%) 0.40-0.70 0.40-0.65
Ni (%) 0.40 max Not specified
P (%) 0.04 max <=0.035
S (%) 0.05 max <=0.035
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A588 CSA G40.21 480A
Tensile Strength 485-630 MPa 620-760 MPa
Yield Strength 345 MPa min 480 MPa min
Elongation 18-21% 15% min
Hardness 140-190 HB Not specified
Impact Not specified 27J at 0°C
Typical Applications
ASTM A588
Used for bridges, railway wagons, transmission poles, architectural structures, containers, and outdoor construction.
CSA G40.21 480A
High-strength atmospheric corrosion-resistant (weathering) structural steel; heavy exposed structural members, bridge girders
Key Differences
Can ASTM A588 Be Substituted With CSA G40.21 480A?
ASTM A588 and CSA G40.21 480A share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
ASTM A588
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2500–2700 mm (98.43–106.3 in)
CSA G40.21 480A
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2500–3400 mm (98.43–133.86 in)
On M-EX Right Now
ASTM A588
2 active listings and RFQs →
CSA G40.21 480A
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A588 and CSA G40.21 480A?
ASTM A588 specifies Ni which is not specified for CSA G40.21 480A.
Can ASTM A588 be substituted with CSA G40.21 480A?
ASTM A588 and CSA G40.21 480A share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.