Post Stock Login Register

ASTM A959:2011 2507 Steel: Specifications & Listings

ASTM A959:2011 2507: Duplex (austenitic-ferritic) stainless steel type 2507 (UNS S32750) with the composition limits of ASTM A959-11. Carbon up to 0.030% and chromium 24.0-26.0%.

Category: Stainless Steel
Grade Details
GradeASTM A959:2011 2507
Standard ASTM A959:2011
ApplicationsWrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Equivalent / Similar Grades
Grade Standard Region Live on M-EX
ASTM A240/A240M S32750 ASTM A240/A240M:2025 USA No activity yet
JIS G4304 SUS327L1 JIS G4304:2021 Japan No activity yet
IS 6603 X02Cr25Ni7Mo4N IS 6603:2024 India No activity yet
EN 10088-1 X2CrNiMoN25-7-4 EN 10088-1:2014 Europe (CEN) No activity yet
EN 10088-3 X2CrNiMoN25-7-4 EN 10088-3:2014 Europe No activity yet
ASTM A240/A240M S32520 ASTM A240/A240M:2025 USA No activity yet
EN 10088-1 X2CrNiMoCuN25-6-3 EN 10088-1:2014 Europe (CEN) No activity yet
EN 10088-3 X2CrNiMoCuN25-6-3 EN 10088-3:2014 Europe No activity yet
Grade ComparisonCompare With a Specific Grade →
Grade Standard Match
ASTM A240/A240M S32750 ASTM A240/A240M:2025 Strong Match
ASTM A276/A276M S32750 ASTM A276/A276M:2017 Strong Match
JIS G4304 SUS327L1 JIS G4304:2021 Strong Match
ASTM A959 S32520 ASTM A959:2011 Strong Match
IS 6603 X02Cr25Ni7Mo4N IS 6603:2024 Strong Match
EN 10088-1 X2CrNiMoN25-7-4 EN 10088-1:2014 Strong Match
EN 10088-1 X2CrNiMoN25-7-4 EN 10088-1:2023 Strong Match
EN 10088-3 X2CrNiMoN25-7-4 EN 10088-3:2014 Strong Match
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Chemical Composition (%)
C Cr Cu Mn Mo N Ni P S Si
<=0.030 24.0-26.0 <=0.50 <=1.20 3.0-5.0 0.24-0.32 6.0-8.0 <=0.035 <=0.020 <=0.80

More data from ASTM A959:2011

From the standard
Other composition limits from Table 1 and its footnotes
UNS number
S32750
Metallurgical class
Austenitic-ferritic (duplex) grade: a mixture of austenitic and ferritic structures, hardenable only by cold working
Type
2507 (common type number, not a trademark, widely used; not associated with any one product)
Values
Maximum unless a range or minimum is shown; where two limits are shown for the same element in one grade the more stringent applies
Other elements (as printed)
Cu 0.50
These are the recommended composition limits of the A959 guide, intended for adoption by standards for stainless steel products; they are not a product specification.
Source: ASTM A959:2011, Table 1 and its footnotes

Active ASTM A959:2011 2507 Listings on M-EX (For Sale)

+ Create a Listing for this grade

No active ASTM A959:2011 2507 listings at this time.

Register for Alerts

Buyer RFQs for ASTM A959:2011 2507

+ Post an RFQ for this grade

No open buyer requirements for ASTM A959:2011 2507 at this time.

Register for Alerts