Post Stock Login Register

ASTM A959:2011 310S Steel: Specifications & Listings

ASTM A959:2011 310S: Austenitic stainless steel type 310S (UNS S31008) with the composition limits of ASTM A959-11. Carbon up to 0.08% and chromium 24.0-26.0%.

Category: Stainless Steel
Grade Details
GradeASTM A959:2011 310S
Standard ASTM A959:2011
ApplicationsWrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Equivalent / Similar Grades
Grade Standard Region Live on M-EX
IS 1570 (Part 5) X04Cr25Ni20 IS 1570 (Part 5):1985 India No activity yet
ASTM A240/A240M S31008 ASTM A240/A240M:2025 USA No activity yet
JIS G4304 SUS310S JIS G4304:2021 Japan No activity yet
BS 970 (Part 1) 310S31 BS 970 (Part 1):1991 UK No activity yet
ASTM A240/A240M S31009 ASTM A240/A240M:2025 USA No activity yet
ASTM A240/A240M S31040 ASTM A240/A240M:2025 USA No activity yet
ASTM A240/A240M S31041 ASTM A240/A240M:2025 USA No activity yet
ASTM A276/A276M S31000 ASTM A276/A276M:2017 USA No activity yet
IS 6603 X12Cr25Ni20 IS 6603:2024 India No activity yet
EN 10088-1 X6CrNi25-20 EN 10088-1:2014 Europe (CEN) No activity yet
Grade ComparisonCompare With a Specific Grade →
Grade Standard Match
ASTM A959 310Cb ASTM A959:2011 Strong Match
IS 1570 (Part 5) X04Cr25Ni20 IS 1570 (Part 5):1985 Strong Match
ASTM A240/A240M S31008 ASTM A240/A240M:2025 Strong Match
ASTM A276/A276M S31008 ASTM A276/A276M:2017 Strong Match
IS 6603 X04Cr25Ni20 IS 6603:2024 Strong Match
JIS G4304 SUS310S JIS G4304:2021 Strong Match
JIS G4305 SUS310S JIS G4305:2012 Strong Match
ASTM A959 310H ASTM A959:2011 Strong Match
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Chemical Composition (%)
C Cr Mn Ni P S Si
<=0.08 24.0-26.0 <=2.00 19.0-22.0 <=0.045 <=0.030 <=1.00

More data from ASTM A959:2011

From the standard
Other composition limits from Table 1 and its footnotes
UNS number
S31008
Metallurgical class
Austenitic grade: usually predominantly face-centered cubic, hardenable only by cold working
Type
310S (designation originally assigned by the American Iron and Steel Institute)
Values
Maximum unless a range or minimum is shown; where two limits are shown for the same element in one grade the more stringent applies
These are the recommended composition limits of the A959 guide, intended for adoption by standards for stainless steel products; they are not a product specification.
Source: ASTM A959:2011, Table 1 and its footnotes

Active ASTM A959:2011 310S Listings on M-EX (For Sale)

+ Create a Listing for this grade

No active ASTM A959:2011 310S listings at this time.

Register for Alerts

Buyer RFQs for ASTM A959:2011 310S

+ Post an RFQ for this grade

No open buyer requirements for ASTM A959:2011 310S at this time.

Register for Alerts