ASTM A959:2011 S32615: Austenitic stainless steel grade (UNS S32615) with the composition limits of ASTM A959-11. Carbon up to 0.07% and chromium 16.5-19.5%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Chemical Composition (%)
C
Cr
Cu
Mn
Mo
Ni
P
S
Si
<=0.07
16.5-19.5
1.50-2.50
<=2.00
0.30-1.50
19.0-22.0
<=0.045
<=0.030
4.8-6.0
More data from ASTM A959:2011
From the standard
Other composition limitsfrom Table 1 and its footnotes
UNS number
S32615
Metallurgical class
Austenitic grade: usually predominantly face-centered cubic, hardenable only by cold working
Type
No type number is printed; the grade is identified by its UNS number only
Values
Maximum unless a range or minimum is shown; where two limits are shown for the same element in one grade the more stringent applies
Other elements (as printed)
Cu 1.50-2.50
These are the recommended composition limits of the A959 guide, intended for adoption by standards for stainless steel products; they are not a product specification.
Source: ASTM A959:2011, Table 1 and its footnotes
Active ASTM A959:2011 S32615 Listings on M-EX (For Sale)