Post Stock Login Register

ASTM A959 S32906 vs ASTM A959 2507

Related Material — 67.3% match based on chemical composition and mechanical property overlap.

ASTM A959 S32906 (ASTM A959:2011) and ASTM A959 2507 (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 S32906 is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while ASTM A959 2507 is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). ASTM A959 S32906 is defined under ASTM International, originating from United States, while ASTM A959 2507 is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A959 S32906 vs ASTM A959 2507 is a 67.3% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 67.3%.

Frequently Compared With ASTM A959 S32906:
ASTM A959 29-4 ASTM A959 29-4-2 GOST 5632 08X18H10 ASTM A959 .- GB/T 3280 06Cr19Ni10 EN 10088-1 1.4006 EN 10088-1 1.4301 IS 1570 (Part 7) 11Cr17Ni13W3TiH GOST 5632 06Kh23N28 EN 10088-1 1.4401 EN 10088-1 1.4845 ASTM A959 29-4C
Match Breakdown
CHEMISTRY MATCH
67.3%
MECHANICAL MATCH
No shared data
OVERALL
67.3%
Specifications
Property ASTM A959 S32906 ASTM A959 2507
Standard ASTM A959:2011 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) <=0.030 <=0.030
Cr (%) 28.0-30.0 24.0-26.0
Cu (%) <=0.80 <=0.50
Mn (%) 0.80-1.50 <=1.20
Mo (%) 1.50-2.60 3.0-5.0
N (%) 0.30-0.40 0.24-0.32
Ni (%) 5.8-7.5 6.0-8.0
P (%) <=0.030 <=0.035
S (%) <=0.030 <=0.020
Si (%) <=0.50 <=0.80
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 S32906
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
ASTM A959 2507
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Can ASTM A959 S32906 Be Substituted With ASTM A959 2507?
ASTM A959 S32906 and ASTM A959 2507 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A959 S32906
0 active listings and RFQs →
ASTM A959 2507
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 S32906 and ASTM A959 2507?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can ASTM A959 S32906 be substituted with ASTM A959 2507?
ASTM A959 S32906 and ASTM A959 2507 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.