Post Stock Login Register

BS 970 (Part 1) 316S13 vs GOST 5632 08X18H10

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

BS 970 (Part 1) 316S13 (BS 970 (Part 1):1991) and GOST 5632 08X18H10 (GOST 5632-2014) are both steel grades. Both fall under the Stainless Steel category. BS 970 (Part 1) 316S13 is typically used for austenitic stainless and heat resisting steel (section five), while GOST 5632 08X18H10 is commonly used for chemical equipment, food processing, general corrosion resistant applications. BS 970 (Part 1) 316S13 is defined under British Standards (BS) (United Kingdom).

As per chemical composition, BS 970 (Part 1) 316S13 vs GOST 5632 08X18H10 is a 64.6% match. As per mechanical properties, the match is 33.3%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With BS 970 (Part 1) 316S13:
EN 10088-1 1.4301 GB/T 3280 06Cr19Ni10 EN 10088-1 1.4401 GOST 5632 06Kh23N28 EN 10088-1 1.4006 ASTM A959 .- EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 12Cr13H
Match Breakdown
CHEMISTRY MATCH
64.6%
MECHANICAL MATCH
33.3%
OVERALL
35%
Specifications
Property BS 970 (Part 1) 316S13 GOST 5632 08X18H10
Standard BS 970 (Part 1):1991 GOST 5632-2014
Category Stainless Steel Stainless Steel
C (%) <=0.030 ≤0.08
Si (%) <=1.0 ≤0.80
Mn (%) <=2.0 ≤2.00
P (%) <=0.045 ≤0.035
S (%) <=0.030 ≤0.020
Cr (%) 16.5-18.5 17.0–19.0
Mo (%) 2.50-3.00 Not specified
Ni (%) 11.5-14.5 9.0–11.0
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property BS 970 (Part 1) 316S13 GOST 5632 08X18H10
Condition Softened, 1000-1100 deg C Not specified
Tensile Strength 490 MPa min ≥520 MPa
Yield Strength 190 MPa min (0.2% proof) ≥205 MPa
Elongation 40 % min ≥40%
Hardness 183 HB max Not specified
Typical Applications
BS 970 (Part 1) 316S13
Austenitic stainless and heat resisting steel (section five)
GOST 5632 08X18H10
Chemical equipment, food processing, general corrosion resistant applications
Key Differences
Can BS 970 (Part 1) 316S13 Be Substituted With GOST 5632 08X18H10?
BS 970 (Part 1) 316S13 and GOST 5632 08X18H10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
BS 970 (Part 1) 316S13
No active listings currently.
GOST 5632 08X18H10
Sheet → (2 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2500–2700 mm (98.43–106.3 in)
On M-EX Right Now
BS 970 (Part 1) 316S13
0 active listings and RFQs →
GOST 5632 08X18H10
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 970 (Part 1) 316S13 and GOST 5632 08X18H10?
BS 970 (Part 1) 316S13 specifies Mo which is not specified for GOST 5632 08X18H10.
Can BS 970 (Part 1) 316S13 be substituted with GOST 5632 08X18H10?
BS 970 (Part 1) 316S13 and GOST 5632 08X18H10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.