Post Stock Login Register

BS 970 EN2E vs SAE J403 1009

Strong Match — 93.3% match based on chemical composition and mechanical property overlap.

BS 970 EN2E (BS 970:1955) and SAE J403 1009 (SAE J403:2014) are both steel grades. Both fall under the Carbon Steel category. BS 970 EN2E is typically used for bars and billets for forging; forgings and drop-forgings; bars for machining, while SAE J403 1009 is commonly used for chemistry-only grade; product scope as listed in the composition notes. BS 970 EN2E is defined under British Standards (BS), originating from United Kingdom, while SAE J403 1009 is defined under SAE International, originating from United States.

As per chemical composition, BS 970 EN2E vs SAE J403 1009 is a 93.3% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 93.3%.

Frequently Compared With BS 970 EN2E:
BS 970 (Part 1) 040A12 BS 970 (Part 1) 045A10 BS 970 (Part 3) 045A10 BS 970 (Part 1) 045M10 BS 970 (Part 1) 045M10 BS 970 (Part 3) 045M10 BS 970 (Part 1) 055M15 BS 970 (Part 1) 060A32 BS 970 (Part 1) 060A45 BS 970 (Part 1) 040A04 BS 970 (Part 1) 040A10 BS 970 (Part 1) 045A10
Match Breakdown
CHEMISTRY MATCH
93.3%
MECHANICAL MATCH
No shared data
OVERALL
93.3%
Specifications
Property BS 970 EN2E SAE J403 1009
Standard BS 970:1955 SAE J403:2014
Category Carbon Steel Carbon Steel
C (%) <=0.15 <=0.15
Si (%) 0.10-0.35 Not specified
Mn (%) <=0.50 <=0.60
S (%) <=0.050 <=0.035 (flat rolled), <=0.050 (long products)
P (%) <=0.050 <=0.030 (flat rolled), <=0.040 (long products)
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property BS 970 EN2E SAE J403 1009
Tensile Strength ≥309 MPa (20 tons/sq in, converted) Not specified
Elongation ≥28% Not specified
Hardness ≤120 HB Not specified
Condition , ruling section 6 in (lowest-strength condition of the standard) Not specified
Typical Applications
BS 970 EN2E
Bars and billets for forging; forgings and drop-forgings; bars for machining
SAE J403 1009
Chemistry-only grade; product scope as listed in the composition notes
Key Differences
Can BS 970 EN2E Be Substituted With SAE J403 1009?
BS 970 EN2E and SAE J403 1009 overlap closely enough on chemistry and mechanical properties that SAE J403 1009 is often considered as a substitute for BS 970 EN2E in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
BS 970 EN2E
0 active listings and RFQs →
SAE J403 1009
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 970 EN2E and SAE J403 1009?
BS 970 EN2E specifies Si which is not specified for SAE J403 1009.
Can BS 970 EN2E be substituted with SAE J403 1009?
BS 970 EN2E and SAE J403 1009 overlap closely enough on chemistry and mechanical properties that SAE J403 1009 is often considered as a substitute for BS 970 EN2E in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.