Post Stock Login Register

BS 970 EN51 vs BS 970 (Part 1) 420S37

Related Material — 67.5% match based on chemical composition and mechanical property overlap.

BS 970 EN51 (BS 970:1955) and BS 970 (Part 1) 420S37 (BS 970 (Part 1):1991) are both steel grades. Both fall under the Stainless Steel category. BS 970 EN51 is typically used for bars and billets for forging; forgings and drop-forgings; bars for machining; bright bars., while BS 970 (Part 1) 420S37 is commonly used for ferritic and martensitic stainless and heat resisting steel (section five). BS 970 EN51 is defined under British Standards (BS), originating from United Kingdom, while BS 970 (Part 1) 420S37 is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, BS 970 EN51 vs BS 970 (Part 1) 420S37 is a 67.5% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 67.5%.

Frequently Compared With BS 970 EN51:
ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
67.5%
MECHANICAL MATCH
No shared data
OVERALL
67.5%
Specifications
Property BS 970 EN51 BS 970 (Part 1) 420S37
Standard BS 970:1955 BS 970 (Part 1):1991
Category Stainless Steel Stainless Steel
C (%) 0.25-0.35 0.20-0.28
Si (%) 0.10-0.35 <=1.0
Mn (%) 0.35-0.75 <=1.0
Ni (%) 2.75-3.25 <=1.00
Cr (%) <=0.30 12.0-14.0
S (%) <=0.050 <=0.030
P (%) <=0.050 <=0.040
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
BS 970 EN51
Bars and billets for forging; forgings and drop-forgings; bars for machining; bright bars.
BS 970 (Part 1) 420S37
Ferritic and martensitic stainless and heat resisting steel (section five)
Can BS 970 EN51 Be Substituted With BS 970 (Part 1) 420S37?
BS 970 EN51 and BS 970 (Part 1) 420S37 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
BS 970 EN51
0 active listings and RFQs →
BS 970 (Part 1) 420S37
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between BS 970 EN51 and BS 970 (Part 1) 420S37?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can BS 970 EN51 be substituted with BS 970 (Part 1) 420S37?
BS 970 EN51 and BS 970 (Part 1) 420S37 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.