Minimal Match — 35% match
based on chemical composition and mechanical property overlap.
CSA G40.21 300W (CSA G40.21-13 (R2023)) and GOST 19281 09G2S (GOST 19281-2014) are both steel grades.
Both fall under the Structural Steel category.
CSA G40.21 300W is typically used for structural fabrication,bridges,buildings,machinery frames,general construction,welded structures, while GOST 19281 09G2S is commonly used for used for bridges, pressure vessels, pipelines, structural frames, and heavy equipment components..
CSA G40.21 300W is defined under Canadian Standards Association (CSA) (Canada).
As per chemical composition, CSA G40.21 300W vs GOST 19281 09G2S is a 64.9% match.
As per mechanical properties, the match is 22.8%.
Combined, this makes them a minimal match overall at 35%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Used for bridges, pressure vessels, pipelines, structural frames, and heavy equipment components.
Key Differences
GOST 19281 09G2S specifies Si, Ni, Cr, Cu which are not specified for CSA G40.21 300W.
Can CSA G40.21 300W Be Substituted With GOST 19281 09G2S?
CSA G40.21 300W and GOST 19281 09G2S share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between CSA G40.21 300W and GOST 19281 09G2S?
GOST 19281 09G2S specifies Si, Ni, Cr, Cu which are not specified for CSA G40.21 300W.
Can CSA G40.21 300W be substituted with GOST 19281 09G2S?
CSA G40.21 300W and GOST 19281 09G2S share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.