Post Stock Login Register

CSA G40.21 480A vs EN 10025-5 S460K2W

Related Material — 61.9% match based on chemical composition and mechanical property overlap.

CSA G40.21 480A (CSA G40.21-13 (R2023)) and EN 10025-5 S460K2W (EN 10025-5:2019) are both steel grades. Both fall under the Structural Steel (Corten / Weathering) category. CSA G40.21 480A is defined under Canadian Standards Association (CSA), originating from Canada, while EN 10025-5 S460K2W is defined under European Standard (EN), originating from Europe.

As per chemical composition, CSA G40.21 480A vs EN 10025-5 S460K2W is a 86.4% match. As per mechanical properties, the match is 13%. Combined, this makes them a related material overall at 61.9%.

Frequently Compared With CSA G40.21 480A:
CSA G40.21 350A EN 10025-5 S355J2W ASTM A588 Grade A EN 10025-5 S355J0WP CSA G40.21 50W EN 10025-5 S355J2WP ASTM A588 AS/NZS 3678 Grade 350WR JIS G3114 SMA400 ASTM A588 Grade B CSA G40.21 260WT ASTM A709 Grade HPS 70W
Match Breakdown
CHEMISTRY MATCH
86.4%
MECHANICAL MATCH
13%
OVERALL
61.9%
Specifications
Property CSA G40.21 480A EN 10025-5 S460K2W
Standard CSA G40.21-13 (R2023) EN 10025-5:2019
Category Structural Steel (Corten / Weathering) Structural Steel (Corten / Weathering)
C (%) <=0.23 <=0.20
Mn (%) <=1.60 <=1.40
Si (%) <=0.40 <=0.65
P (%) <=0.035 <=0.030
S (%) <=0.035 <=0.030
Cu (%) 0.20-0.40 0.25-0.55
Cr (%) 0.40-0.65 0.40-0.80
N (%) Not specified <=0.025
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property CSA G40.21 480A EN 10025-5 S460K2W
Tensile Strength 620-760 MPa 530-710 MPa
Yield Strength 480 MPa min >=460 MPa
Elongation 15% min >=17%
Impact 27J at 0°C Not specified
Condition Not specified Nominal thickness up to 16 mm for yield, 3 to 100 mm for tensile, 3 to 40 mm for elongation (Lo = 5.65 sqrt(S0), longitudinal); transverse values are lower, see blocks
Typical Applications
CSA G40.21 480A
High-strength atmospheric corrosion-resistant (weathering) structural steel; heavy exposed structural members, bridge girders
EN 10025-5 S460K2W
Not documented
Key Differences
Can CSA G40.21 480A Be Substituted With EN 10025-5 S460K2W?
CSA G40.21 480A and EN 10025-5 S460K2W share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
CSA G40.21 480A
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2500–3400 mm (98.43–133.86 in)
EN 10025-5 S460K2W
No active listings currently.
On M-EX Right Now
CSA G40.21 480A
2 active listings and RFQs →
EN 10025-5 S460K2W
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between CSA G40.21 480A and EN 10025-5 S460K2W?
EN 10025-5 S460K2W specifies N which is not specified for CSA G40.21 480A.
Can CSA G40.21 480A be substituted with EN 10025-5 S460K2W?
CSA G40.21 480A and EN 10025-5 S460K2W share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.