Post Stock Login Register

EN 10025-2 E335 vs ASTM A36

Related Material — 61% match based on chemical composition and mechanical property overlap.

EN 10025-2 E335 (EN 10025-2:2019) and ASTM A36 (ASTM A36) are both steel grades. EN 10025-2 E335 is classified under Structural Steel, while ASTM A36 is classified under Carbon Steel — a different category, which is worth noting alongside the chemistry match below. EN 10025-2 E335 is typically used for hot rolled products of structural steels, while ASTM A36 is commonly used for structural fabrication, bridges, buildings, machinery parts, flanges. EN 10025-2 E335 is defined under European Standard (EN), originating from Europe, while ASTM A36 is defined under ASTM International, originating from United States.

As per chemical composition, EN 10025-2 E335 vs ASTM A36 is a 91.5% match. As per mechanical properties, the match is 0%. Combined, this makes them a related material overall at 61%.

Frequently Compared With EN 10025-2 E335:
GOST 19281 09G2S CSA G40.21 260W AS/NZS 3679.1 300 AS/NZS 3679.1 350 CSA G40.21 400W CSA G40.21 480W ASTM A1008 SS Grade 80 ASTM A572 Gr.65
Other Structural Steel Grades to Compare With EN 10025-2 E335:
CSA G40.21 300W CSA G40.21 350W CSA G40.21 400A ASTM A1008 SS Grade 50
Match Breakdown
CHEMISTRY MATCH
91.5%
MECHANICAL MATCH
0%
OVERALL
61%
Specifications
Property EN 10025-2 E335 ASTM A36
Standard EN 10025-2:2019 ASTM A36
Category Structural Steel Carbon Steel
P (%) <=0.045 ≤0.040
S (%) <=0.045 ≤0.050
N (%) <=0.012 Not specified
C (%) Not specified ≤0.26
Mn (%) Not specified ≤1.20
Si (%) Not specified 0.15–0.40
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10025-2 E335 ASTM A36
Tensile Strength 570-710 MPa 400–550 MPa
Yield Strength >=335 MPa 250 MPa min
Elongation >=16% ≥23%
Condition Nominal thickness up to 16 mm (tensile for 3 to 100 mm, elongation for 3 to 40 mm), longitudinal test pieces Not specified
Typical Applications
EN 10025-2 E335
Hot rolled products of structural steels
ASTM A36
Structural fabrication, bridges, buildings, machinery parts, flanges
Key Differences
Can EN 10025-2 E335 Be Substituted With ASTM A36?
EN 10025-2 E335 and ASTM A36 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
EN 10025-2 E335
No active listings currently.
ASTM A36
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2500–2700 mm (98.43–106.3 in)
Round Bar → (2 listings)
Diameter: 40–40 mm (1.57–1.57 in)
Length: 5600–6500 mm (220.47–255.91 in)
On M-EX Right Now
EN 10025-2 E335
0 active listings and RFQs →
ASTM A36
4 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10025-2 E335 and ASTM A36?
Different category: EN 10025-2 E335 is Structural Steel, ASTM A36 is Carbon Steel. EN 10025-2 E335 specifies N which is not specified for ASTM A36. ASTM A36 specifies C, Mn, Si which are not specified for EN 10025-2 E335.
Can EN 10025-2 E335 be substituted with ASTM A36?
EN 10025-2 E335 and ASTM A36 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.