Post Stock Login Register

EN 10025-2 E335 vs GB/T 700 Q235

Related Material — 61% match based on chemical composition and mechanical property overlap.

EN 10025-2 E335 (EN 10025-2:2019) and GB/T 700 Q235 (GB/T 700-2006) are both steel grades. Both fall under the Structural Steel category. EN 10025-2 E335 is typically used for hot rolled products of structural steels, while GB/T 700 Q235 is commonly used for general structural fabrication, bridges, buildings. EN 10025-2 E335 is defined under European Standard (EN), originating from Europe, while GB/T 700 Q235 is defined under Guobiao Standards (GB/T), originating from China.

As per chemical composition, EN 10025-2 E335 vs GB/T 700 Q235 is a 91.5% match. As per mechanical properties, the match is 0%. Combined, this makes them a related material overall at 61%.

Frequently Compared With EN 10025-2 E335:
GOST 19281 09G2S CSA G40.21 260W AS/NZS 3679.1 300 AS/NZS 3679.1 350 CSA G40.21 400W CSA G40.21 480W ASTM A1008 SS Grade 80 ASTM A572 Gr.65
Other Structural Steel Grades to Compare With EN 10025-2 E335:
CSA G40.21 300W CSA G40.21 350W CSA G40.21 400A ASTM A1008 SS Grade 50
Match Breakdown
CHEMISTRY MATCH
91.5%
MECHANICAL MATCH
0%
OVERALL
61%
Specifications
Property EN 10025-2 E335 GB/T 700 Q235
Standard EN 10025-2:2019 GB/T 700-2006
Category Structural Steel Structural Steel
P (%) <=0.045 ≤0.045
S (%) <=0.045 ≤0.050
N (%) <=0.012 Not specified
C (%) Not specified ≤0.22
Mn (%) Not specified 0.30–0.70
Si (%) Not specified ≤0.35
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10025-2 E335 GB/T 700 Q235
Tensile Strength 570-710 MPa 375–500 MPa
Yield Strength >=335 MPa ≥235 MPa
Elongation >=16% ≥26%
Condition Nominal thickness up to 16 mm (tensile for 3 to 100 mm, elongation for 3 to 40 mm), longitudinal test pieces Not specified
Typical Applications
EN 10025-2 E335
Hot rolled products of structural steels
GB/T 700 Q235
General structural fabrication, bridges, buildings
Key Differences
Can EN 10025-2 E335 Be Substituted With GB/T 700 Q235?
EN 10025-2 E335 and GB/T 700 Q235 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
EN 10025-2 E335
No active listings currently.
GB/T 700 Q235
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 3100–3700 mm (122.05–145.67 in)
On M-EX Right Now
EN 10025-2 E335
0 active listings and RFQs →
GB/T 700 Q235
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10025-2 E335 and GB/T 700 Q235?
EN 10025-2 E335 specifies N which is not specified for GB/T 700 Q235. GB/T 700 Q235 specifies C, Mn, Si which are not specified for EN 10025-2 E335.
Can EN 10025-2 E335 be substituted with GB/T 700 Q235?
EN 10025-2 E335 and GB/T 700 Q235 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.