Post Stock Login Register

EN 10025-2 S355J0 vs CSA G40.21 480W

Related Material — 64.2% match based on chemical composition and mechanical property overlap.

EN 10025-2 S355J0 (EN 10025-2:2019) and CSA G40.21 480W (CSA G40.21-13 (R2023)) are both steel grades. Both fall under the Structural Steel category. EN 10025-2 S355J0 is typically used for hot rolled products of structural steels, while CSA G40.21 480W is commonly used for heavy cranes, offshore structures, high-rise building frames, pressure vessels, heavy mining equipment.. EN 10025-2 S355J0 is defined under European Standard (EN), originating from Europe, while CSA G40.21 480W is defined under Canadian Standards Association (CSA), originating from Canada.

As per chemical composition, EN 10025-2 S355J0 vs CSA G40.21 480W is a 93.2% match. As per mechanical properties, the match is 6.3%. Combined, this makes them a related material overall at 64.2%.

Frequently Compared With EN 10025-2 S355J0:
AS/NZS 3679.1 300
Other Structural Steel Grades to Compare With EN 10025-2 S355J0:
GOST 19281 09G2S CSA G40.21 260W CSA G40.21 300W AS/NZS 3679.1 350 CSA G40.21 350W CSA G40.21 400A CSA G40.21 400W ASTM A1008 SS Grade 50 ASTM A1008 SS Grade 80 ASTM A283C ASTM A572 Gr.65
Match Breakdown
CHEMISTRY MATCH
93.2%
MECHANICAL MATCH
6.3%
OVERALL
64.2%
Specifications
Property EN 10025-2 S355J0 CSA G40.21 480W
Standard EN 10025-2:2019 CSA G40.21-13 (R2023)
Category Structural Steel Structural Steel
C (%) <=0.24 max 0.23
Si (%) <=0.55 max 0.5
Mn (%) <=1.60 max 1.7
P (%) <=0.030 max 0.035
S (%) <=0.030 max 0.035
N (%) <=0.012 Not specified
Cu (%) <=0.55 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10025-2 S355J0 CSA G40.21 480W
Tensile Strength 470-630 MPa 590-790 MPa
Yield Strength >=355 MPa 480 MPa min
Elongation >=22% Not specified
Condition Nominal thickness up to 16 mm (tensile for 3 to 100 mm, elongation for 3 to 40 mm), longitudinal test pieces Not specified
Typical Applications
EN 10025-2 S355J0
Hot rolled products of structural steels
CSA G40.21 480W
Heavy cranes, offshore structures, high-rise building frames, pressure vessels, heavy mining equipment.
Key Differences
Can EN 10025-2 S355J0 Be Substituted With CSA G40.21 480W?
EN 10025-2 S355J0 and CSA G40.21 480W share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
EN 10025-2 S355J0
No active listings currently.
CSA G40.21 480W
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2900–3000 mm (114.17–118.11 in)
On M-EX Right Now
EN 10025-2 S355J0
0 active listings and RFQs →
CSA G40.21 480W
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10025-2 S355J0 and CSA G40.21 480W?
EN 10025-2 S355J0 specifies N, Cu which are not specified for CSA G40.21 480W.
Can EN 10025-2 S355J0 be substituted with CSA G40.21 480W?
EN 10025-2 S355J0 and CSA G40.21 480W share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.