Post Stock Login Register

EN 10025-2 S460JR vs EN 10025-3 S460JR

Strong Match — 95.5% match based on chemical composition and mechanical property overlap.

EN 10025-2 S460JR (EN 10025-2:2019) and EN 10025-3 S460JR (EN 10025-3:2019) are both steel grades. Both fall under the Structural Steel category. EN 10025-2 S460JR is typically used for hot rolled products of structural steels, while EN 10025-3 S460JR is commonly used for used in bridges, welded steel structures, industrial buildings, heavy trailers, and crane booms.. EN 10025-2 S460JR is defined under European Standard (EN), originating from Europe, while EN 10025-3 S460JR is defined under European Standard (EN), originating from Europe.

As per chemical composition, EN 10025-2 S460JR vs EN 10025-3 S460JR is a 94.1% match. As per mechanical properties, the match is 98.1%. Combined, this makes them a strong match overall at 95.5%.

Frequently Compared With EN 10025-2 S460JR:
GOST 19281 09G2S CSA G40.21 260W AS/NZS 3679.1 300 CSA G40.21 300W AS/NZS 3679.1 350 CSA G40.21 400W CSA G40.21 480W ASTM A1008 SS Grade 50 ASTM A1008 SS Grade 80 ASTM A572 Gr.65
Other Structural Steel Grades to Compare With EN 10025-2 S460JR:
CSA G40.21 350W CSA G40.21 400A
Match Breakdown
CHEMISTRY MATCH
94.1%
MECHANICAL MATCH
98.1%
OVERALL
95.5%
Specifications
Property EN 10025-2 S460JR EN 10025-3 S460JR
Standard EN 10025-2:2019 EN 10025-3:2019
Category Structural Steel Structural Steel
C (%) <=0.20 0.20 max
Si (%) <=0.55 0.60 max
Mn (%) <=1.70 1.70 max
P (%) <=0.030 0.030 max
S (%) <=0.030 0.030 max
N (%) <=0.025 Not specified
Cu (%) <=0.55 Not specified
Nb (%) <=0.05 0.06 max
V (%) <=0.13 0.12 max
Ti (%) <=0.05 0.05 max
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10025-2 S460JR EN 10025-3 S460JR
Tensile Strength 550-720 MPa 540-720 MPa
Yield Strength >=460 MPa 460 MPa min
Elongation >=17% 17% min
Condition Nominal thickness up to 16 mm (tensile for 3 to 100 mm, elongation for 3 to 40 mm), longitudinal test pieces Not specified
Hardness Not specified 180-230 HB
Typical Applications
EN 10025-2 S460JR
Hot rolled products of structural steels
EN 10025-3 S460JR
Used in bridges, welded steel structures, industrial buildings, heavy trailers, and crane booms.
Key Differences
Can EN 10025-2 S460JR Be Substituted With EN 10025-3 S460JR?
EN 10025-2 S460JR and EN 10025-3 S460JR overlap closely enough on chemistry and mechanical properties that EN 10025-3 S460JR is often considered as a substitute for EN 10025-2 S460JR in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
Forms & Sizes Available on M-EX
EN 10025-2 S460JR
No active listings currently.
EN 10025-3 S460JR
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2500–2500 mm (98.43–98.43 in)
On M-EX Right Now
EN 10025-2 S460JR
0 active listings and RFQs →
EN 10025-3 S460JR
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10025-2 S460JR and EN 10025-3 S460JR?
EN 10025-2 S460JR specifies N, Cu which are not specified for EN 10025-3 S460JR.
Can EN 10025-2 S460JR be substituted with EN 10025-3 S460JR?
EN 10025-2 S460JR and EN 10025-3 S460JR overlap closely enough on chemistry and mechanical properties that EN 10025-3 S460JR is often considered as a substitute for EN 10025-2 S460JR in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.