Post Stock Login Register

EN 10025-3 S460NL vs GOST 19281 09G2S

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

EN 10025-3 S460NL (EN 10025-3:2019) and GOST 19281 09G2S (GOST 19281-2014) are both steel grades. Both fall under the Structural Steel category. EN 10025-3 S460NL is defined under European Standard (EN) (Europe).

As per chemical composition, EN 10025-3 S460NL vs GOST 19281 09G2S is a 64.4% match. As per mechanical properties, the match is 14.5%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With EN 10025-3 S460NL:
CSA G40.21 350W CSA G40.21 260W CSA G40.21 300W AS/NZS 3679.1 350 CSA G40.21 400W ASTM A283C ASTM A572 Gr.65 AS/NZS 3679.1 300 CSA G40.21 400A CSA G40.21 480W ASTM A1008 SS Grade 50 ASTM A1008 SS Grade 80
Match Breakdown
CHEMISTRY MATCH
64.4%
MECHANICAL MATCH
14.5%
OVERALL
35%
Specifications
Property EN 10025-3 S460NL GOST 19281 09G2S
Standard EN 10025-3:2019 GOST 19281-2014
Category Structural Steel Structural Steel
C (%) <=0.20 0.07-0.12
Si (%) <=0.60 0.5-0.8
Mn (%) 1.00-1.70 1.3-1.7
P (%) <=0.025 0.035 max
S (%) <=0.020 0.04 max
Nb (%) <=0.05 Not specified
V (%) <=0.20 Not specified
Ni (%) <=0.80 0.3 max
N (%) <=0.025 Not specified
Al (%) >=0.02 Not specified
Ti (%) <=0.05 Not specified
Cr (%) <=0.30 0.3 max
Mo (%) <=0.10 Not specified
Cu (%) <=0.55 0.3 max
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10025-3 S460NL GOST 19281 09G2S
Tensile Strength 540-720 MPa 490-640 MPa
Yield Strength >=460 MPa 345 MPa min
Elongation >=17% 21% min
Condition Normalized or normalized rolled (N), nominal thickness up to 16 mm (tensile strength up to 100 mm), Table 4 Not specified
Hardness Not specified 140-190 HB
Typical Applications
EN 10025-3 S460NL
Not documented
GOST 19281 09G2S
Used for bridges, pressure vessels, pipelines, structural frames, and heavy equipment components.
Key Differences
Can EN 10025-3 S460NL Be Substituted With GOST 19281 09G2S?
EN 10025-3 S460NL and GOST 19281 09G2S share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
EN 10025-3 S460NL
No active listings currently.
GOST 19281 09G2S
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2900–3800 mm (114.17–149.61 in)
On M-EX Right Now
EN 10025-3 S460NL
0 active listings and RFQs →
GOST 19281 09G2S
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10025-3 S460NL and GOST 19281 09G2S?
EN 10025-3 S460NL specifies Nb, V, N, Al which are not specified for GOST 19281 09G2S.
Can EN 10025-3 S460NL be substituted with GOST 19281 09G2S?
EN 10025-3 S460NL and GOST 19281 09G2S share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.