Post Stock Login Register

EN 10025-3 S460 vs AS/NZS 3679.1 300

Related Material — 63.4% match based on chemical composition and mechanical property overlap.

EN 10025-3 S460 (EN 10025-3:2019) and AS/NZS 3679.1 300 (AS/NZS 3679.1:2016) are both steel grades. Both fall under the Structural Steel category. EN 10025-3 S460 is typically used for used in structural frameworks, lifting equipment, pressure-support structures, transport chassis, and construction machinery., while AS/NZS 3679.1 300 is commonly used for hot-rolled structural bars and sections for general structural framing. EN 10025-3 S460 is defined under European Standard (EN), originating from Europe, while AS/NZS 3679.1 300 is defined under Australian/New Zealand Standard (AS/NZS), originating from Australia/New Zealand.

As per chemical composition, EN 10025-3 S460 vs AS/NZS 3679.1 300 is a 91.5% match. As per mechanical properties, the match is 7.1%. Combined, this makes them a related material overall at 63.4%.

Frequently Compared With EN 10025-3 S460:
CSA G40.21 400A CSA G40.21 480W AS/NZS 3679.1 350 CSA G40.21 300W GOST 19281 09G2S CSA G40.21 260W CSA G40.21 400W ASTM A1008 SS Grade 50 CSA G40.21 350W ASTM A572 Gr.65 ASTM A283C ASTM A1008 SS Grade 80
Match Breakdown
CHEMISTRY MATCH
91.5%
MECHANICAL MATCH
7.1%
OVERALL
63.4%
Specifications
Property EN 10025-3 S460 AS/NZS 3679.1 300
Standard EN 10025-3:2019 AS/NZS 3679.1:2016
Category Structural Steel Structural Steel
C (%) 0.20 max <=0.22
Si (%) 0.60 max <=0.50
Mn (%) 1.70 max <=1.70
P (%) 0.025 max <=0.040
S (%) 0.020 max <=0.040
Nb (%) 0.06 max Not specified
V (%) 0.12 max Not specified
Ti (%) 0.05 max Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10025-3 S460 AS/NZS 3679.1 300
Tensile Strength 540-720 MPa 440-600 MPa
Yield Strength 460 MPa min 300 MPa min
Elongation 17% min 22% min
Hardness 180-230 HB Not specified
Typical Applications
EN 10025-3 S460
Used in structural frameworks, lifting equipment, pressure-support structures, transport chassis, and construction machinery.
AS/NZS 3679.1 300
Hot-rolled structural bars and sections for general structural framing
Key Differences
Can EN 10025-3 S460 Be Substituted With AS/NZS 3679.1 300?
EN 10025-3 S460 and AS/NZS 3679.1 300 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
EN 10025-3 S460
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2700–4400 mm (106.3–173.23 in)
AS/NZS 3679.1 300
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2700–2700 mm (106.3–106.3 in)
On M-EX Right Now
EN 10025-3 S460
2 active listings and RFQs →
AS/NZS 3679.1 300
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10025-3 S460 and AS/NZS 3679.1 300?
EN 10025-3 S460 specifies Nb, V, Ti which are not specified for AS/NZS 3679.1 300.
Can EN 10025-3 S460 be substituted with AS/NZS 3679.1 300?
EN 10025-3 S460 and AS/NZS 3679.1 300 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.