Post Stock Login Register

EN 10025-3 S460 vs ASTM A1008 SS Grade 80

Related Material — 60.3% match based on chemical composition and mechanical property overlap.

EN 10025-3 S460 (EN 10025-3:2019) and ASTM A1008 SS Grade 80 (ASTM A1008) are both steel grades. Both fall under the Structural Steel category. EN 10025-3 S460 is typically used for used in structural frameworks, lifting equipment, pressure-support structures, transport chassis, and construction machinery., while ASTM A1008 SS Grade 80 is commonly used for cold-rolled high-strength structural steel sheet, higher strength grade; automotive structural/reinforcement components, cold-formed high-strength parts. EN 10025-3 S460 is defined under European Standard (EN), originating from Europe, while ASTM A1008 SS Grade 80 is defined under ASTM International, originating from United States.

As per chemical composition, EN 10025-3 S460 vs ASTM A1008 SS Grade 80 is a 90.4% match. As per mechanical properties, the match is 0%. Combined, this makes them a related material overall at 60.3%.

Frequently Compared With EN 10025-3 S460:
CSA G40.21 400A CSA G40.21 480W AS/NZS 3679.1 350 CSA G40.21 300W GOST 19281 09G2S CSA G40.21 400W CSA G40.21 260W AS/NZS 3679.1 300 ASTM A1008 SS Grade 50 CSA G40.21 350W ASTM A283C ASTM A572 Gr.65
Match Breakdown
CHEMISTRY MATCH
90.4%
MECHANICAL MATCH
0%
OVERALL
60.3%
Specifications
Property EN 10025-3 S460 ASTM A1008 SS Grade 80
Standard EN 10025-3:2019 ASTM A1008
Category Structural Steel Structural Steel
C (%) 0.20 max <=0.25
Si (%) 0.60 max <=0.50
Mn (%) 1.70 max <=1.65
P (%) 0.025 max <=0.040
S (%) 0.020 max <=0.040
Nb (%) 0.06 max Not specified
V (%) 0.12 max Not specified
Ti (%) 0.05 max Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10025-3 S460 ASTM A1008 SS Grade 80
Tensile Strength 540-720 MPa 570 MPa min
Yield Strength 460 MPa min 550 MPa min
Elongation 17% min 10% min
Hardness 180-230 HB Not specified
Typical Applications
EN 10025-3 S460
Used in structural frameworks, lifting equipment, pressure-support structures, transport chassis, and construction machinery.
ASTM A1008 SS Grade 80
Cold-rolled high-strength structural steel sheet, higher strength grade; automotive structural/reinforcement components, cold-formed high-strength parts
Key Differences
Can EN 10025-3 S460 Be Substituted With ASTM A1008 SS Grade 80?
EN 10025-3 S460 and ASTM A1008 SS Grade 80 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
EN 10025-3 S460
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2700–4400 mm (106.3–173.23 in)
ASTM A1008 SS Grade 80
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2500–3700 mm (98.43–145.67 in)
On M-EX Right Now
EN 10025-3 S460
2 active listings and RFQs →
ASTM A1008 SS Grade 80
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10025-3 S460 and ASTM A1008 SS Grade 80?
EN 10025-3 S460 specifies Nb, V, Ti which are not specified for ASTM A1008 SS Grade 80.
Can EN 10025-3 S460 be substituted with ASTM A1008 SS Grade 80?
EN 10025-3 S460 and ASTM A1008 SS Grade 80 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.