Post Stock Login Register

EN 10025-3 S460JR vs AS/NZS 3679.1 300

Related Material — 64.1% match based on chemical composition and mechanical property overlap.

EN 10025-3 S460JR (EN 10025-3:2019) and AS/NZS 3679.1 300 (AS/NZS 3679.1:2016) are both steel grades. Both fall under the Structural Steel category. EN 10025-3 S460JR is typically used for used in bridges, welded steel structures, industrial buildings, heavy trailers, and crane booms., while AS/NZS 3679.1 300 is commonly used for hot-rolled structural bars and sections for general structural framing. EN 10025-3 S460JR is defined under European Standard (EN), originating from Europe, while AS/NZS 3679.1 300 is defined under Australian/New Zealand Standard (AS/NZS), originating from Australia/New Zealand.

As per chemical composition, EN 10025-3 S460JR vs AS/NZS 3679.1 300 is a 92.6% match. As per mechanical properties, the match is 7.1%. Combined, this makes them a related material overall at 64.1%.

Frequently Compared With EN 10025-3 S460JR:
CSA G40.21 480W CSA G40.21 400W CSA G40.21 300W AS/NZS 3679.1 350 CSA G40.21 260W GOST 19281 09G2S CSA G40.21 350W CSA G40.21 400A ASTM A1008 SS Grade 50 ASTM A572 Gr.65 ASTM A283C ASTM A1008 SS Grade 80
Match Breakdown
CHEMISTRY MATCH
92.6%
MECHANICAL MATCH
7.1%
OVERALL
64.1%
Specifications
Property EN 10025-3 S460JR AS/NZS 3679.1 300
Standard EN 10025-3:2019 AS/NZS 3679.1:2016
Category Structural Steel Structural Steel
C (%) 0.20 max <=0.22
Si (%) 0.60 max <=0.50
Mn (%) 1.70 max <=1.70
P (%) 0.030 max <=0.040
S (%) 0.030 max <=0.040
Nb (%) 0.06 max Not specified
V (%) 0.12 max Not specified
Ti (%) 0.05 max Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10025-3 S460JR AS/NZS 3679.1 300
Tensile Strength 540-720 MPa 440-600 MPa
Yield Strength 460 MPa min 300 MPa min
Elongation 17% min 22% min
Hardness 180-230 HB Not specified
Typical Applications
EN 10025-3 S460JR
Used in bridges, welded steel structures, industrial buildings, heavy trailers, and crane booms.
AS/NZS 3679.1 300
Hot-rolled structural bars and sections for general structural framing
Key Differences
Can EN 10025-3 S460JR Be Substituted With AS/NZS 3679.1 300?
EN 10025-3 S460JR and AS/NZS 3679.1 300 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
EN 10025-3 S460JR
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2500–2500 mm (98.43–98.43 in)
AS/NZS 3679.1 300
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2700–2700 mm (106.3–106.3 in)
On M-EX Right Now
EN 10025-3 S460JR
2 active listings and RFQs →
AS/NZS 3679.1 300
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10025-3 S460JR and AS/NZS 3679.1 300?
EN 10025-3 S460JR specifies Nb, V, Ti which are not specified for AS/NZS 3679.1 300.
Can EN 10025-3 S460JR be substituted with AS/NZS 3679.1 300?
EN 10025-3 S460JR and AS/NZS 3679.1 300 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.