Post Stock Login Register

EN 10025-3 S460JR vs CSA G40.21 260W

Related Material — 63.3% match based on chemical composition and mechanical property overlap.

EN 10025-3 S460JR (EN 10025-3:2019) and CSA G40.21 260W (CSA G40.21-13 (R2023)) are both steel grades. Both fall under the Structural Steel category. EN 10025-3 S460JR is typically used for used in bridges, welded steel structures, industrial buildings, heavy trailers, and crane booms., while CSA G40.21 260W is commonly used for bridges, buildings, general structural fabrication, storage tanks, older infrastructure projects.. EN 10025-3 S460JR is defined under European Standard (EN), originating from Europe, while CSA G40.21 260W is defined under Canadian Standards Association (CSA), originating from Canada.

As per chemical composition, EN 10025-3 S460JR vs CSA G40.21 260W is a 90.9% match. As per mechanical properties, the match is 8.1%. Combined, this makes them a related material overall at 63.3%.

Frequently Compared With EN 10025-3 S460JR:
CSA G40.21 480W CSA G40.21 400W CSA G40.21 300W AS/NZS 3679.1 350 GOST 19281 09G2S AS/NZS 3679.1 300 CSA G40.21 400A CSA G40.21 350W ASTM A1008 SS Grade 50 ASTM A572 Gr.65 ASTM A283C ASTM A1008 SS Grade 80
Match Breakdown
CHEMISTRY MATCH
90.9%
MECHANICAL MATCH
8.1%
OVERALL
63.3%
Specifications
Property EN 10025-3 S460JR CSA G40.21 260W
Standard EN 10025-3:2019 CSA G40.21-13 (R2023)
Category Structural Steel Structural Steel
C (%) 0.20 max max 0.23
Si (%) 0.60 max max 0.4
Mn (%) 1.70 max max 1.4
P (%) 0.030 max max 0.035
S (%) 0.030 max max 0.035
Nb (%) 0.06 max Not specified
V (%) 0.12 max Not specified
Ti (%) 0.05 max Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10025-3 S460JR CSA G40.21 260W
Tensile Strength 540-720 MPa 410-590 MPa
Yield Strength 460 MPa min 260 MPa min
Elongation 17% min Not specified
Hardness 180-230 HB Not specified
Typical Applications
EN 10025-3 S460JR
Used in bridges, welded steel structures, industrial buildings, heavy trailers, and crane booms.
CSA G40.21 260W
Bridges, buildings, general structural fabrication, storage tanks, older infrastructure projects.
Key Differences
Can EN 10025-3 S460JR Be Substituted With CSA G40.21 260W?
EN 10025-3 S460JR and CSA G40.21 260W share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
EN 10025-3 S460JR
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2500–2500 mm (98.43–98.43 in)
CSA G40.21 260W
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 3400–4000 mm (133.86–157.48 in)
On M-EX Right Now
EN 10025-3 S460JR
2 active listings and RFQs →
CSA G40.21 260W
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10025-3 S460JR and CSA G40.21 260W?
EN 10025-3 S460JR specifies Nb, V, Ti which are not specified for CSA G40.21 260W.
Can EN 10025-3 S460JR be substituted with CSA G40.21 260W?
EN 10025-3 S460JR and CSA G40.21 260W share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.