Post Stock Login Register

EN 10025-3 S460JR vs ASTM A283C

Related Material — 59% match based on chemical composition and mechanical property overlap.

EN 10025-3 S460JR (EN 10025-3:2019) and ASTM A283C (ASTM A283) are both steel grades. Both fall under the Structural Steel category. EN 10025-3 S460JR is typically used for used in bridges, welded steel structures, industrial buildings, heavy trailers, and crane booms., while ASTM A283C is commonly used for used for structural fabrication, storage tanks, buildings, bridges, machinery bases, and welded structures.. EN 10025-3 S460JR is defined under European Standard (EN), originating from Europe, while ASTM A283C is defined under ASTM International, originating from United States.

As per chemical composition, EN 10025-3 S460JR vs ASTM A283C is a 88.6% match. As per mechanical properties, the match is 0%. Combined, this makes them a related material overall at 59%.

Frequently Compared With EN 10025-3 S460JR:
CSA G40.21 480W CSA G40.21 400W CSA G40.21 300W AS/NZS 3679.1 350 CSA G40.21 260W GOST 19281 09G2S AS/NZS 3679.1 300 CSA G40.21 400A CSA G40.21 350W ASTM A1008 SS Grade 50 ASTM A572 Gr.65 ASTM A1008 SS Grade 80
Match Breakdown
CHEMISTRY MATCH
88.6%
MECHANICAL MATCH
0%
OVERALL
59%
Specifications
Property EN 10025-3 S460JR ASTM A283C
Standard EN 10025-3:2019 ASTM A283
Category Structural Steel Structural Steel
C (%) 0.20 max 0.24 max
Si (%) 0.60 max 0.40 max
Mn (%) 1.70 max 0.90 max
P (%) 0.030 max 0.035 max
S (%) 0.030 max 0.040 max
Nb (%) 0.06 max Not specified
V (%) 0.12 max Not specified
Ti (%) 0.05 max Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10025-3 S460JR ASTM A283C
Tensile Strength 540-720 MPa 380-515 MPa
Yield Strength 460 MPa min 205 MPa min
Elongation 17% min 23-27%
Hardness 180-230 HB 120-170 HB
Typical Applications
EN 10025-3 S460JR
Used in bridges, welded steel structures, industrial buildings, heavy trailers, and crane booms.
ASTM A283C
Used for structural fabrication, storage tanks, buildings, bridges, machinery bases, and welded structures.
Key Differences
Can EN 10025-3 S460JR Be Substituted With ASTM A283C?
EN 10025-3 S460JR and ASTM A283C share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
EN 10025-3 S460JR
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2500–2500 mm (98.43–98.43 in)
ASTM A283C
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2900–3700 mm (114.17–145.67 in)
On M-EX Right Now
EN 10025-3 S460JR
2 active listings and RFQs →
ASTM A283C
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10025-3 S460JR and ASTM A283C?
EN 10025-3 S460JR specifies Nb, V, Ti which are not specified for ASTM A283C.
Can EN 10025-3 S460JR be substituted with ASTM A283C?
EN 10025-3 S460JR and ASTM A283C share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.