Post Stock Login Register

EN 10025-3 S500 vs CSA G40.21 400W

Related Material — 67.8% match based on chemical composition and mechanical property overlap.

EN 10025-3 S500 (EN 10025-3:2019) and CSA G40.21 400W (CSA G40.21-13 (R2023)) are both steel grades. Both fall under the Structural Steel category. EN 10025-3 S500 is typically used for used in heavy structural sections, mining equipment, bridge fabrication, transport vehicles, and offshore structures., while CSA G40.21 400W is commonly used for heavy structural fabrication, bridges, offshore platforms, cranes, pressure vessels, mining equipment.. EN 10025-3 S500 is defined under European Standard (EN), originating from Europe, while CSA G40.21 400W is defined under Canadian Standards Association (CSA), originating from Canada.

As per chemical composition, EN 10025-3 S500 vs CSA G40.21 400W is a 91.7% match. As per mechanical properties, the match is 20%. Combined, this makes them a related material overall at 67.8%.

Frequently Compared With EN 10025-3 S500:
CSA G40.21 480W AS/NZS 3679.1 300 CSA G40.21 260W AS/NZS 3679.1 350 ASTM A572 Gr.65 GOST 19281 09G2S CSA G40.21 300W CSA G40.21 400A CSA G40.21 350W ASTM A1008 SS Grade 50 ASTM A283C ASTM A1008 SS Grade 80
Match Breakdown
CHEMISTRY MATCH
91.7%
MECHANICAL MATCH
20%
OVERALL
67.8%
Specifications
Property EN 10025-3 S500 CSA G40.21 400W
Standard EN 10025-3:2019 CSA G40.21-13 (R2023)
Category Structural Steel Structural Steel
C (%) 0.22 max max 0.23
Si (%) 0.60 max max 0.5
Mn (%) 1.80 max max 1.6
P (%) 0.025 max max 0.035
S (%) 0.020 max max 0.035
Nb (%) 0.06 max Not specified
V (%) 0.12 max Not specified
Ti (%) 0.05 max Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10025-3 S500 CSA G40.21 400W
Tensile Strength 590-770 MPa 520-690 MPa
Yield Strength 500 MPa min 400 MPa min
Elongation 16% min Not specified
Hardness 190-240 HB Not specified
Typical Applications
EN 10025-3 S500
Used in heavy structural sections, mining equipment, bridge fabrication, transport vehicles, and offshore structures.
CSA G40.21 400W
Heavy structural fabrication, bridges, offshore platforms, cranes, pressure vessels, mining equipment.
Key Differences
Can EN 10025-3 S500 Be Substituted With CSA G40.21 400W?
EN 10025-3 S500 and CSA G40.21 400W share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
EN 10025-3 S500
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2500–2800 mm (98.43–110.24 in)
CSA G40.21 400W
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2500–5200 mm (98.43–204.72 in)
On M-EX Right Now
EN 10025-3 S500
2 active listings and RFQs →
CSA G40.21 400W
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10025-3 S500 and CSA G40.21 400W?
EN 10025-3 S500 specifies Nb, V, Ti which are not specified for CSA G40.21 400W.
Can EN 10025-3 S500 be substituted with CSA G40.21 400W?
EN 10025-3 S500 and CSA G40.21 400W share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.