Post Stock Login Register

EN 10028-2 20MnMoNi4-5 vs EN 10088-1 X20CrMoV11-1

Related Material — 60.7% match based on chemical composition and mechanical property overlap.

EN 10028-2 20MnMoNi4-5 (EN 10028-2:2017) and EN 10088-1 X20CrMoV11-1 (EN 10088-1:2014) are both steel grades. EN 10028-2 20MnMoNi4-5 is classified under Alloy Steel, while EN 10088-1 X20CrMoV11-1 is classified under Stainless Steel — a different category, which is worth noting alongside the chemistry match below. EN 10028-2 20MnMoNi4-5 is defined under European Standard (EN), originating from Europe, while EN 10088-1 X20CrMoV11-1 is defined under European Standard (EN), originating from Europe.

As per chemical composition, EN 10028-2 20MnMoNi4-5 vs EN 10088-1 X20CrMoV11-1 is a 60.7% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 60.7%.

Frequently Compared With EN 10028-2 20MnMoNi4-5:
IS 4367 10Cr9Mo10 IS 1570 (Part 4) 07Cr4Mo6 IS 4367 07Cr4Mo6 UNI 11234 100Cr6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 7) 10Cr36Mo10H IS 1570 (Part 4) 10Mo6 IS 1570 (Part 7) 10Mo6H NF A35-565 100C6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 103Cr6
Match Breakdown
CHEMISTRY MATCH
60.7%
MECHANICAL MATCH
No shared data
OVERALL
60.7%
Specifications
Property EN 10028-2 20MnMoNi4-5 EN 10088-1 X20CrMoV11-1
Standard EN 10028-2:2017 EN 10088-1:2014
Category Alloy Steel Stainless Steel
C (%) 0.15-0.23 0.17-0.23
Si (%) <=0.40 <=0.40
Mn (%) 1.00-1.50 0.30-1.00
P (%) <=0.020 <=0.025
S (%) <=0.010 <=0.015
N (%) <=0.012 Not specified
Cr (%) <=0.20 10.0-12.5
Cu (%) <=0.20 Not specified
Mo (%) 0.45-0.60 0.80-1.20
Ni (%) 0.40-0.80 0.30-0.80
V (%) <=0.02 0.20-0.35
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10028-2 20MnMoNi4-5 EN 10088-1 X20CrMoV11-1
Tensile Strength 590-750 MPa Not specified
Yield Strength >=470 MPa Not specified
Elongation >=18% Not specified
Condition Usual delivery condition quenched and tempered (+QT), nominal thickness up to 40 mm; transverse direction, Yield Strength is ReH, Elongation is A Not specified
Typical Applications
EN 10028-2 20MnMoNi4-5
Flat products for pressure purposes
EN 10088-1 X20CrMoV11-1
Not documented
Key Differences
Can EN 10028-2 20MnMoNi4-5 Be Substituted With EN 10088-1 X20CrMoV11-1?
EN 10028-2 20MnMoNi4-5 and EN 10088-1 X20CrMoV11-1 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10028-2 20MnMoNi4-5
0 active listings and RFQs →
EN 10088-1 X20CrMoV11-1
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10028-2 20MnMoNi4-5 and EN 10088-1 X20CrMoV11-1?
Different category: EN 10028-2 20MnMoNi4-5 is Alloy Steel, EN 10088-1 X20CrMoV11-1 is Stainless Steel. EN 10028-2 20MnMoNi4-5 specifies N, Cu which are not specified for EN 10088-1 X20CrMoV11-1.
Can EN 10028-2 20MnMoNi4-5 be substituted with EN 10088-1 X20CrMoV11-1?
EN 10028-2 20MnMoNi4-5 and EN 10088-1 X20CrMoV11-1 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.