Strong Match — 91.5% match
based on chemical composition and mechanical property overlap.
EN 10084 15NiCr13 (EN 10084:2008) and IS 4367 13Ni13Cr3 (IS 4367:1991) are both steel grades.
Both fall under the Alloy Steel category.
EN 10084 15NiCr13 is typically used for heavily loaded gears, cams, camshafts, while IS 4367 13Ni13Cr3 is commonly used for gears, pinion gears, camshafts, transmission parts, aircraft components, heavy duty shafts.
EN 10084 15NiCr13 is defined under European Standard (EN), originating from Europe, while IS 4367 13Ni13Cr3 is defined under Bureau of Indian Standards (IS), originating from India.
As per chemical composition, EN 10084 15NiCr13 vs IS 4367 13Ni13Cr3 is a 87.2% match.
As per mechanical properties, the match is 100%.
Combined, this makes them a strong match overall at 91.5%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
EN 10084 15NiCr13
IS 4367 13Ni13Cr3
Condition
Soft annealed
Refined, quenched and stress relieved (core properties), ruling section up to 60 mm
Hardenability
+H band at 1.5 mm from the quenched end: 41 to 48 HRC
Can EN 10084 15NiCr13 Be Substituted With IS 4367 13Ni13Cr3?
EN 10084 15NiCr13 and IS 4367 13Ni13Cr3 overlap closely enough on chemistry and mechanical properties that IS 4367 13Ni13Cr3 is often considered as a substitute for EN 10084 15NiCr13 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between EN 10084 15NiCr13 and IS 4367 13Ni13Cr3?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can EN 10084 15NiCr13 be substituted with IS 4367 13Ni13Cr3?
EN 10084 15NiCr13 and IS 4367 13Ni13Cr3 overlap closely enough on chemistry and mechanical properties that IS 4367 13Ni13Cr3 is often considered as a substitute for EN 10084 15NiCr13 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.