Post Stock Login Register

EN 10088-2 X2CrNiMnMoN25-18-6-5 vs EN 10088-1 X2CrNiMoN25-7-4

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

EN 10088-2 X2CrNiMnMoN25-18-6-5 (EN 10088-2:2014) and EN 10088-1 X2CrNiMoN25-7-4 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. EN 10088-2 X2CrNiMnMoN25-18-6-5 is defined under European Standard (EN), originating from Europe, while EN 10088-1 X2CrNiMoN25-7-4 is defined under European Standard (EN), originating from Europe.

As per chemical composition, EN 10088-2 X2CrNiMnMoN25-18-6-5 vs EN 10088-1 X2CrNiMoN25-7-4 is a 71% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With EN 10088-2 X2CrNiMnMoN25-18-6-5:
IS 1570 (Part 7) 12Cr12Ni2Mo GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr13H ASTM A959 .- GB/T 3280 06Cr19Ni10 EN 10088-1 1.4301 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH
Match Breakdown
CHEMISTRY MATCH
71%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property EN 10088-2 X2CrNiMnMoN25-18-6-5 EN 10088-1 X2CrNiMoN25-7-4
Standard EN 10088-2:2014 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) <=0.030 <=0.030
Si (%) <=1.00 <=1.00
Mn (%) 5.0-7.0 <=2.00
P (%) <=0.030 <=0.035
S (%) <=0.015 <=0.015
Cr (%) 24.0-26.0 24.0-26.0
Mo (%) 4.0-5.0 3.0-4.5
Ni (%) 16.0-19.0 6.0-8.0
N (%) 0.30-0.60 0.24-0.35
Nb (%) <=0.15 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10088-2 X2CrNiMnMoN25-18-6-5 EN 10088-1 X2CrNiMoN25-7-4
Tensile Strength 800-950 MPa Not specified
Yield Strength >=420 MPa Not specified
Elongation >=30% Not specified
Condition Solution annealed (+AT), cold rolled strip, up to 6 mm thick; Yield Strength is Rp0.2 (transverse), Elongation is A80 for under 3 mm thick Not specified
Typical Applications
EN 10088-2 X2CrNiMnMoN25-18-6-5
General purposes, hot or cold rolled sheet/plate and strip
EN 10088-1 X2CrNiMoN25-7-4
Not documented
Key Differences
Can EN 10088-2 X2CrNiMnMoN25-18-6-5 Be Substituted With EN 10088-1 X2CrNiMoN25-7-4?
EN 10088-2 X2CrNiMnMoN25-18-6-5 and EN 10088-1 X2CrNiMoN25-7-4 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
EN 10088-2 X2CrNiMnMoN25-18-6-5
0 active listings and RFQs →
EN 10088-1 X2CrNiMoN25-7-4
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10088-2 X2CrNiMnMoN25-18-6-5 and EN 10088-1 X2CrNiMoN25-7-4?
EN 10088-2 X2CrNiMnMoN25-18-6-5 specifies Nb which is not specified for EN 10088-1 X2CrNiMoN25-7-4.
Can EN 10088-2 X2CrNiMnMoN25-18-6-5 be substituted with EN 10088-1 X2CrNiMoN25-7-4?
EN 10088-2 X2CrNiMnMoN25-18-6-5 and EN 10088-1 X2CrNiMoN25-7-4 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.