Post Stock Login Register

EN 10346 S350GD vs CSA G40.21 300W

Related Material — 62.1% match based on chemical composition and mechanical property overlap.

EN 10346 S350GD (EN 10346:2015) and CSA G40.21 300W (CSA G40.21-13 (R2023)) are both steel grades. Both fall under the Structural Steel category. EN 10346 S350GD is typically used for continuous hot-dip galvanized structural steel strip/sheet; roll-formed and cold-formed structural sections, purlins, roofing and cladding requiring corrosion protection, while CSA G40.21 300W is commonly used for structural fabrication,bridges,buildings,machinery frames,general construction,welded structures. EN 10346 S350GD is defined under European Standard (EN), originating from Europe, while CSA G40.21 300W is defined under Canadian Standards Association (CSA), originating from Canada.

As per chemical composition, EN 10346 S350GD vs CSA G40.21 300W is a 93.2% match. As per mechanical properties, the match is 0%. Combined, this makes them a related material overall at 62.1%.

Frequently Compared With EN 10346 S350GD:
AS/NZS 1595 C350 ASTM A1008 SS Grade 50 CSA G40.21 400W GOST 19281 09G2S AS/NZS 3679.1 350 CSA G40.21 260W CSA G40.21 400A AS/NZS 3679.1 300 CSA G40.21 350W CSA G40.21 480W ASTM A283C ASTM A1008 SS Grade 80
Match Breakdown
CHEMISTRY MATCH
93.2%
MECHANICAL MATCH
0%
OVERALL
62.1%
Specifications
Property EN 10346 S350GD CSA G40.21 300W
Standard EN 10346:2015 CSA G40.21-13 (R2023)
Category Structural Steel Structural Steel
C (%) <=0.20 <=0.23
Mn (%) <=1.50 <=1.50
Si (%) <=0.50 Not specified
P (%) <=0.040 <=0.040
S (%) <=0.040 <=0.050
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property EN 10346 S350GD CSA G40.21 300W
Tensile Strength 420 MPa min 450-620 MPa
Yield Strength 350 MPa min 300 MPa min
Elongation 14% min 20-23 %
Typical Applications
EN 10346 S350GD
Continuous hot-dip galvanized structural steel strip/sheet; roll-formed and cold-formed structural sections, purlins, roofing and cladding requiring corrosion protection
CSA G40.21 300W
structural fabrication,bridges,buildings,machinery frames,general construction,welded structures
Key Differences
Can EN 10346 S350GD Be Substituted With CSA G40.21 300W?
EN 10346 S350GD and CSA G40.21 300W share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
EN 10346 S350GD
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2700–4100 mm (106.3–161.42 in)
CSA G40.21 300W
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2700–2800 mm (106.3–110.24 in)
On M-EX Right Now
EN 10346 S350GD
2 active listings and RFQs →
CSA G40.21 300W
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between EN 10346 S350GD and CSA G40.21 300W?
EN 10346 S350GD specifies Si which is not specified for CSA G40.21 300W.
Can EN 10346 S350GD be substituted with CSA G40.21 300W?
EN 10346 S350GD and CSA G40.21 300W share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.