Post Stock Login Register

GB/T 3077 17CrNiMo6 vs GB/T 3077 12Cr2Ni4A

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

GB/T 3077 17CrNiMo6 (GB/T 3077-2015) and GB/T 3077 12Cr2Ni4A (GB/T 3077-2015) are both steel grades. Both fall under the Alloy Steel category. GB/T 3077 17CrNiMo6 is typically used for used for automotive gears, gearboxes, shafts, pinions, industrial reducers, and heavy machinery components., while GB/T 3077 12Cr2Ni4A is commonly used for used for gears, shafts, pinions, aircraft parts, heavy-duty bearings, and transmission components.. GB/T 3077 17CrNiMo6 is defined under Guobiao Standards (GB/T), originating from China, while GB/T 3077 12Cr2Ni4A is defined under Guobiao Standards (GB/T), originating from China.

As per chemical composition, GB/T 3077 17CrNiMo6 vs GB/T 3077 12Cr2Ni4A is a 63.6% match. As per mechanical properties, the match is 81.4%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With GB/T 3077 17CrNiMo6:
NF A35-565 100C6 UNI 11234 100Cr6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 7) 10Cr36Mo10H IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 10Mo6 IS 4367 07Cr4Mo6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 10Cr20Mo6 IS 4367 10Cr9Mo10 EN 10028-2 10CrMo9-10
Match Breakdown
CHEMISTRY MATCH
63.6%
MECHANICAL MATCH
81.4%
OVERALL
35%
Specifications
Property GB/T 3077 17CrNiMo6 GB/T 3077 12Cr2Ni4A
Standard GB/T 3077-2015 GB/T 3077-2015
Category Alloy Steel Alloy Steel
C (%) 0.14-0.19 0.10-0.15
Si (%) 0.17-0.37 0.17-0.37
Mn (%) 0.50-0.80 0.30-0.60
Cr (%) 1.50-1.80 1.25-1.65
Ni (%) 1.40-1.70 3.25-3.75
Mo (%) 0.25-0.35 Not specified
P (%) 0.025 max 0.025 max
S (%) 0.035 max 0.025 max
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GB/T 3077 17CrNiMo6 GB/T 3077 12Cr2Ni4A
Tensile Strength 1000-1200 MPa 980-1180 MPa
Yield Strength 800-1000 MPa 785-980 MPa
Elongation 9-13% 10-14%
Hardness 58-62 HRC (case) 58-62 HRC (case)
Typical Applications
GB/T 3077 17CrNiMo6
Used for automotive gears, gearboxes, shafts, pinions, industrial reducers, and heavy machinery components.
GB/T 3077 12Cr2Ni4A
Used for gears, shafts, pinions, aircraft parts, heavy-duty bearings, and transmission components.
Key Differences
Can GB/T 3077 17CrNiMo6 Be Substituted With GB/T 3077 12Cr2Ni4A?
GB/T 3077 17CrNiMo6 and GB/T 3077 12Cr2Ni4A share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
GB/T 3077 17CrNiMo6
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 5800–6000 mm (228.35–236.22 in)
GB/T 3077 12Cr2Ni4A
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 5000–6600 mm (196.85–259.84 in)
On M-EX Right Now
GB/T 3077 17CrNiMo6
2 active listings and RFQs →
GB/T 3077 12Cr2Ni4A
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between GB/T 3077 17CrNiMo6 and GB/T 3077 12Cr2Ni4A?
GB/T 3077 17CrNiMo6 specifies Mo which is not specified for GB/T 3077 12Cr2Ni4A.
Can GB/T 3077 17CrNiMo6 be substituted with GB/T 3077 12Cr2Ni4A?
GB/T 3077 17CrNiMo6 and GB/T 3077 12Cr2Ni4A share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.