Post Stock Login Register

GB/T 3077 40CrNiMoA vs IS 1570 (Part 4) 10Cr20Mo6

Related Material — 56.6% match based on chemical composition and mechanical property overlap.

GB/T 3077 40CrNiMoA (GB/T 3077-2015) and IS 1570 (Part 4) 10Cr20Mo6 (IS 1570 (Part 4):1988) are both steel grades. Both fall under the Alloy Steel category. GB/T 3077 40CrNiMoA is defined under Guobiao Standards (GB/T), originating from China, while IS 1570 (Part 4) 10Cr20Mo6 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, GB/T 3077 40CrNiMoA vs IS 1570 (Part 4) 10Cr20Mo6 is a 56.6% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 56.6%.

Frequently Compared With GB/T 3077 40CrNiMoA:
GB/T 3077 12Cr2Ni4A UNI 11234 100Cr6 GOST 4543 12HN3A NF A35-565 100C6 IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 105Cr5 IS 4367 10Cr9Mo10 IS 4367 07Cr4Mo6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 7) 10Cr36Mo10H EN 10028-2 10CrMo9-10
Match Breakdown
CHEMISTRY MATCH
56.6%
MECHANICAL MATCH
No shared data
OVERALL
56.6%
Specifications
Property GB/T 3077 40CrNiMoA IS 1570 (Part 4) 10Cr20Mo6
Standard GB/T 3077-2015 IS 1570 (Part 4):1988
Category Alloy Steel Alloy Steel
C (%) 0.37-0.44 <=0.15
Si (%) 0.17-0.37 <=0.50
Mn (%) 0.50-0.80 0.40-0.70
Cr (%) 0.60-0.90 4.0-6.0
Ni (%) 1.25-1.65 <=0.30
Mo (%) 0.15-0.25 0.45-0.65
P (%) 0.025 max Not specified
S (%) 0.025 max Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GB/T 3077 40CrNiMoA IS 1570 (Part 4) 10Cr20Mo6
Tensile Strength 1080-1280 MPa Not specified
Yield Strength 930-1080 MPa Not specified
Elongation 10-14% Not specified
Hardness 30-38 HRC Not specified
Typical Applications
GB/T 3077 40CrNiMoA
Used for crankshafts, turbine shafts, heavy-duty gears, aircraft landing parts, bolts, and pressure components.
IS 1570 (Part 4) 10Cr20Mo6
Not documented
Key Differences
Can GB/T 3077 40CrNiMoA Be Substituted With IS 1570 (Part 4) 10Cr20Mo6?
GB/T 3077 40CrNiMoA and IS 1570 (Part 4) 10Cr20Mo6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
GB/T 3077 40CrNiMoA
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 4200–7000 mm (165.35–275.59 in)
IS 1570 (Part 4) 10Cr20Mo6
No active listings currently.
On M-EX Right Now
GB/T 3077 40CrNiMoA
2 active listings and RFQs →
IS 1570 (Part 4) 10Cr20Mo6
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between GB/T 3077 40CrNiMoA and IS 1570 (Part 4) 10Cr20Mo6?
GB/T 3077 40CrNiMoA specifies P, S which are not specified for IS 1570 (Part 4) 10Cr20Mo6.
Can GB/T 3077 40CrNiMoA be substituted with IS 1570 (Part 4) 10Cr20Mo6?
GB/T 3077 40CrNiMoA and IS 1570 (Part 4) 10Cr20Mo6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.