Post Stock Login Register

GB/T 3077 40CrNiMoA vs IS 4367 07Cr4Mo6

Minimal Match — 41% match based on chemical composition and mechanical property overlap.

GB/T 3077 40CrNiMoA (GB/T 3077-2015) and IS 4367 07Cr4Mo6 (IS 4367:1991) are both steel grades. Both fall under the Alloy Steel category. GB/T 3077 40CrNiMoA is defined under Guobiao Standards (GB/T), originating from China, while IS 4367 07Cr4Mo6 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, GB/T 3077 40CrNiMoA vs IS 4367 07Cr4Mo6 is a 61.5% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 41%.

Frequently Compared With GB/T 3077 40CrNiMoA:
GB/T 3077 12Cr2Ni4A GOST 4543 12HN3A UNI 11234 100Cr6 NF A35-565 100C6 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 7) 10Cr36Mo10H IS 4367 10Cr9Mo10 EN 10028-2 10CrMo9-10
Match Breakdown
CHEMISTRY MATCH
61.5%
MECHANICAL MATCH
0%
OVERALL
41%
Specifications
Property GB/T 3077 40CrNiMoA IS 4367 07Cr4Mo6
Standard GB/T 3077-2015 IS 4367:1991
Category Alloy Steel Alloy Steel
C (%) 0.37-0.44 <=0.12
Si (%) 0.17-0.37 0.15-0.60
Mn (%) 0.50-0.80 0.40-0.70
Cr (%) 0.60-0.90 0.70-1.10
Ni (%) 1.25-1.65 <=0.30
Mo (%) 0.15-0.25 0.45-0.65
P (%) 0.025 max <=0.035
S (%) 0.025 max <=0.035
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GB/T 3077 40CrNiMoA IS 4367 07Cr4Mo6
Tensile Strength 1080-1280 MPa 380-550 MPa
Yield Strength 930-1080 MPa 225 MPa min
Elongation 10-14% >=19%
Hardness 30-38 HRC Not specified
Izod Impact Not specified 60 J min
Hardness (soft annealed) Not specified <=170 HB
Condition Not specified Normalised and tempered, ruling section up to 40 mm
Typical Applications
GB/T 3077 40CrNiMoA
Used for crankshafts, turbine shafts, heavy-duty gears, aircraft landing parts, bolts, and pressure components.
IS 4367 07Cr4Mo6
Not documented
Can GB/T 3077 40CrNiMoA Be Substituted With IS 4367 07Cr4Mo6?
GB/T 3077 40CrNiMoA and IS 4367 07Cr4Mo6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
GB/T 3077 40CrNiMoA
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 4200–7000 mm (165.35–275.59 in)
IS 4367 07Cr4Mo6
No active listings currently.
On M-EX Right Now
GB/T 3077 40CrNiMoA
2 active listings and RFQs →
IS 4367 07Cr4Mo6
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between GB/T 3077 40CrNiMoA and IS 4367 07Cr4Mo6?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can GB/T 3077 40CrNiMoA be substituted with IS 4367 07Cr4Mo6?
GB/T 3077 40CrNiMoA and IS 4367 07Cr4Mo6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.