Post Stock Login Register

GB/T 700 Q235 vs IS 1570 (Part 2/Sec 1) 2C2

Related Material — 65% match based on chemical composition and mechanical property overlap.

GB/T 700 Q235 (GB/T 700-2006) and IS 1570 (Part 2/Sec 1) 2C2 (IS 1570 (Part 2/Sec 1):1979) are both steel grades. GB/T 700 Q235 is classified under Structural Steel, while IS 1570 (Part 2/Sec 1) 2C2 is classified under Carbon Steel — a different category, which is worth noting alongside the chemistry match below. GB/T 700 Q235 is defined under Guobiao Standards (GB/T), originating from China, while IS 1570 (Part 2/Sec 1) 2C2 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, GB/T 700 Q235 vs IS 1570 (Part 2/Sec 1) 2C2 is a 95.1% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 65%.

Frequently Compared With GB/T 700 Q235:
GOST 19281 09G2S ASTM A1008 SS Grade 50 CSA G40.21 350W ASTM A572 Gr.65 ASTM A1008 SS Grade 80 CSA G40.21 300W CSA G40.21 400A CSA G40.21 400W AS/NZS 3679.1 300 AS/NZS 3679.1 350 ASTM A283C CSA G40.21 480W
Match Breakdown
CHEMISTRY MATCH
95.1%
MECHANICAL MATCH
No shared data
OVERALL
65%
Specifications
Property GB/T 700 Q235 IS 1570 (Part 2/Sec 1) 2C2
Standard GB/T 700-2006 IS 1570 (Part 2/Sec 1):1979
Category Structural Steel Carbon Steel
C (%) ≤0.22 <=0.05
Mn (%) 0.30–0.70 <=0.40
Si (%) ≤0.35 Not specified
S (%) ≤0.050 Not specified
P (%) ≤0.045 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GB/T 700 Q235 IS 1570 (Part 2/Sec 1) 2C2
Tensile Strength 375–500 MPa Not specified
Yield Strength ≥235 MPa Not specified
Elongation ≥26% Not specified
Typical Applications
GB/T 700 Q235
General structural fabrication, bridges, buildings
IS 1570 (Part 2/Sec 1) 2C2
Not documented
Key Differences
Can GB/T 700 Q235 Be Substituted With IS 1570 (Part 2/Sec 1) 2C2?
GB/T 700 Q235 and IS 1570 (Part 2/Sec 1) 2C2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
GB/T 700 Q235
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 3100–3700 mm (122.05–145.67 in)
IS 1570 (Part 2/Sec 1) 2C2
No active listings currently.
On M-EX Right Now
GB/T 700 Q235
2 active listings and RFQs →
IS 1570 (Part 2/Sec 1) 2C2
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between GB/T 700 Q235 and IS 1570 (Part 2/Sec 1) 2C2?
Different category: GB/T 700 Q235 is Structural Steel, IS 1570 (Part 2/Sec 1) 2C2 is Carbon Steel. GB/T 700 Q235 specifies Si, S, P which are not specified for IS 1570 (Part 2/Sec 1) 2C2.
Can GB/T 700 Q235 be substituted with IS 1570 (Part 2/Sec 1) 2C2?
GB/T 700 Q235 and IS 1570 (Part 2/Sec 1) 2C2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.