Post Stock Login Register

GOST 1435 U10 vs IS 1570 (Part 4) 36Si7

Related Material — 65% match based on chemical composition and mechanical property overlap.

GOST 1435 U10 (GOST 1435-1999) and IS 1570 (Part 4) 36Si7 (IS 1570 (Part 4):1988) are both steel grades. GOST 1435 U10 is classified under Tool & Die Steels, while IS 1570 (Part 4) 36Si7 is classified under Alloy Steel — a different category, which is worth noting alongside the chemistry match below. IS 1570 (Part 4) 36Si7 is defined under Bureau of Indian Standards (IS) (India).

As per chemical composition, GOST 1435 U10 vs IS 1570 (Part 4) 36Si7 is a 78.8% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 65%.

Frequently Compared With GOST 1435 U10:
DIN EN ISO 4957 1.2379 GB/T 1299 4Cr5MoSiV1 DIN EN ISO 4957 1.2344 EN ISO 4957 1.2316 EN ISO 683-17 100Cr6 AISI 52100 GB/T 1299 4Cr5MoSiV GOST 5950 3H2W8F GOST 5950 4H5MFS GOST 5950 4H5MFS1 IS 1570 (Part 6) 103T3 GB/T 1299 3Cr2W8V
Match Breakdown
CHEMISTRY MATCH
78.8%
MECHANICAL MATCH
No shared data
OVERALL
65%
Specifications
Property GOST 1435 U10 IS 1570 (Part 4) 36Si7
Standard GOST 1435-1999 IS 1570 (Part 4):1988
Category Tool & Die Steels Alloy Steel
C (%) 0.95-1.04 0.33-0.40
Mn (%) 0.17-0.33 0.80-1.00
Si (%) 0.17-0.33 1.50-2.00
S (%) 0.028 max Not specified
P (%) 0.03 max Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GOST 1435 U10 IS 1570 (Part 4) 36Si7
Tensile Strength 750-900 MPa Not specified
Yield Strength 450 MPa min Not specified
Elongation 10% min Not specified
Hardness 60-64 HRC Not specified
Typical Applications
GOST 1435 U10
Used for chisels, punches, files, woodworking tools, and knives.
IS 1570 (Part 4) 36Si7
Not documented
Key Differences
Can GOST 1435 U10 Be Substituted With IS 1570 (Part 4) 36Si7?
GOST 1435 U10 and IS 1570 (Part 4) 36Si7 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
GOST 1435 U10
Round Bar → (2 listings)
Diameter: 80–80 mm (3.15–3.15 in)
Length: 2800–3100 mm (110.24–122.05 in)
IS 1570 (Part 4) 36Si7
No active listings currently.
On M-EX Right Now
GOST 1435 U10
2 active listings and RFQs →
IS 1570 (Part 4) 36Si7
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between GOST 1435 U10 and IS 1570 (Part 4) 36Si7?
Different category: GOST 1435 U10 is Tool & Die Steels, IS 1570 (Part 4) 36Si7 is Alloy Steel. GOST 1435 U10 specifies S, P which are not specified for IS 1570 (Part 4) 36Si7.
Can GOST 1435 U10 be substituted with IS 1570 (Part 4) 36Si7?
GOST 1435 U10 and IS 1570 (Part 4) 36Si7 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.