Post Stock Login Register

GOST 19281 09G2S vs ASTM A1008 SS Grade 80

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

GOST 19281 09G2S (GOST 19281-2014) and ASTM A1008 SS Grade 80 (ASTM A1008) are both steel grades. Both fall under the Structural Steel category. GOST 19281 09G2S is typically used for used for bridges, pressure vessels, pipelines, structural frames, and heavy equipment components., while ASTM A1008 SS Grade 80 is commonly used for cold-rolled high-strength structural steel sheet, higher strength grade; automotive structural/reinforcement components, cold-formed high-strength parts. ASTM A1008 SS Grade 80 is defined under ASTM International (United States).

As per chemical composition, GOST 19281 09G2S vs ASTM A1008 SS Grade 80 is a 65.9% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With GOST 19281 09G2S:
ASTM A1008 SS Grade 50 AS/NZS 1595 C450 IS 2062 E250B0 CSA G40.21 400W CSA G40.21 300W CSA G40.21 480W CSA G40.21 260W AS/NZS 1595 C350 ASTM A572 Grade 50 IS 2062 E250A CSA G40.21 350W ASTM A572 Gr.65
Match Breakdown
CHEMISTRY MATCH
65.9%
MECHANICAL MATCH
0%
OVERALL
35%
Specifications
Property GOST 19281 09G2S ASTM A1008 SS Grade 80
Standard GOST 19281-2014 ASTM A1008
Category Structural Steel Structural Steel
C (%) 0.07-0.12 <=0.25
Mn (%) 1.3-1.7 <=1.65
Si (%) 0.5-0.8 <=0.50
S (%) 0.04 max <=0.040
P (%) 0.035 max <=0.040
Ni (%) 0.3 max Not specified
Cr (%) 0.3 max Not specified
Cu (%) 0.3 max Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GOST 19281 09G2S ASTM A1008 SS Grade 80
Tensile Strength 490-640 MPa 570 MPa min
Yield Strength 345 MPa min 550 MPa min
Elongation 21% min 10% min
Hardness 140-190 HB Not specified
Typical Applications
GOST 19281 09G2S
Used for bridges, pressure vessels, pipelines, structural frames, and heavy equipment components.
ASTM A1008 SS Grade 80
Cold-rolled high-strength structural steel sheet, higher strength grade; automotive structural/reinforcement components, cold-formed high-strength parts
Key Differences
Can GOST 19281 09G2S Be Substituted With ASTM A1008 SS Grade 80?
GOST 19281 09G2S and ASTM A1008 SS Grade 80 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
GOST 19281 09G2S
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2900–3800 mm (114.17–149.61 in)
ASTM A1008 SS Grade 80
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2500–3700 mm (98.43–145.67 in)
On M-EX Right Now
GOST 19281 09G2S
2 active listings and RFQs →
ASTM A1008 SS Grade 80
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between GOST 19281 09G2S and ASTM A1008 SS Grade 80?
GOST 19281 09G2S specifies Ni, Cr, Cu which are not specified for ASTM A1008 SS Grade 80.
Can GOST 19281 09G2S be substituted with ASTM A1008 SS Grade 80?
GOST 19281 09G2S and ASTM A1008 SS Grade 80 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.