Post Stock Login Register

GOST 801 ShKh15 vs EN 10028-2 10CrMo9-10

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

GOST 801 ShKh15 (GOST 801-1978) and EN 10028-2 10CrMo9-10 (EN 10028-2:2017) are both steel grades. Both fall under the Alloy Steel category. GOST 801 ShKh15 is typically used for used for ball bearings, roller bearings, races, bearing rings, and precision rollers., while EN 10028-2 10CrMo9-10 is commonly used for flat products for pressure purposes. EN 10028-2 10CrMo9-10 is defined under European Standard (EN) (Europe).

As per chemical composition, GOST 801 ShKh15 vs EN 10028-2 10CrMo9-10 is a 57.5% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With GOST 801 ShKh15:
UNI 11234 100Cr6 NF A35-565 100C6 GOST 4543 12HN3A IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 105Cr5 GB/T 3077 12Cr2Ni4A IS 4367 07Cr4Mo6 IS 1570 (Part 4) 10Cr20Mo6 IS 4367 10Cr9Mo10 IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 7) 10Cr36Mo10H
Match Breakdown
CHEMISTRY MATCH
57.5%
MECHANICAL MATCH
0%
OVERALL
35%
Specifications
Property GOST 801 ShKh15 EN 10028-2 10CrMo9-10
Standard GOST 801-1978 EN 10028-2:2017
Category Alloy Steel Alloy Steel
C (%) 0.95-1.05 0.08-0.14
Cr (%) 1.35-1.65 2.00-2.50
Mn (%) 0.2-0.5 0.40-0.80
Si (%) 0.17-0.37 <=0.50
P (%) Not specified <=0.020
S (%) Not specified <=0.010
N (%) Not specified <=0.012
Cu (%) Not specified <=0.30
Mo (%) Not specified 0.90-1.10
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GOST 801 ShKh15 EN 10028-2 10CrMo9-10
Tensile Strength 750-950 MPa 480-630 MPa
Yield Strength 450 MPa min >=310 MPa
Elongation 8% min >=18%
Hardness 60-66 HRC Not specified
Condition Not specified Usual delivery condition normalized and tempered (+NT), nominal thickness up to 16 mm; transverse direction, Yield Strength is ReH, Elongation is A
Typical Applications
GOST 801 ShKh15
Used for ball bearings, roller bearings, races, bearing rings, and precision rollers.
EN 10028-2 10CrMo9-10
Flat products for pressure purposes
Key Differences
Can GOST 801 ShKh15 Be Substituted With EN 10028-2 10CrMo9-10?
GOST 801 ShKh15 and EN 10028-2 10CrMo9-10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
GOST 801 ShKh15
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 6600–7000 mm (259.84–275.59 in)
EN 10028-2 10CrMo9-10
No active listings currently.
On M-EX Right Now
GOST 801 ShKh15
2 active listings and RFQs →
EN 10028-2 10CrMo9-10
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between GOST 801 ShKh15 and EN 10028-2 10CrMo9-10?
EN 10028-2 10CrMo9-10 specifies P, S, N, Cu which are not specified for GOST 801 ShKh15.
Can GOST 801 ShKh15 be substituted with EN 10028-2 10CrMo9-10?
GOST 801 ShKh15 and EN 10028-2 10CrMo9-10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.