Post Stock Login Register

GOST 801 ShKh15 vs IS 4367 10Cr9Mo10

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

GOST 801 ShKh15 (GOST 801-1978) and IS 4367 10Cr9Mo10 (IS 4367:1991) are both steel grades. Both fall under the Alloy Steel category. IS 4367 10Cr9Mo10 is defined under Bureau of Indian Standards (IS) (India).

As per chemical composition, GOST 801 ShKh15 vs IS 4367 10Cr9Mo10 is a 57.4% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With GOST 801 ShKh15:
UNI 11234 100Cr6 NF A35-565 100C6 GOST 4543 12HN3A IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 103Cr6 GB/T 3077 12Cr2Ni4A IS 4367 07Cr4Mo6 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 7) 10Cr36Mo10H EN 10028-2 10CrMo9-10
Match Breakdown
CHEMISTRY MATCH
57.4%
MECHANICAL MATCH
0%
OVERALL
35%
Specifications
Property GOST 801 ShKh15 IS 4367 10Cr9Mo10
Standard GOST 801-1978 IS 4367:1991
Category Alloy Steel Alloy Steel
C (%) 0.95-1.05 <=0.15
Cr (%) 1.35-1.65 2.00-2.50
Mn (%) 0.2-0.5 0.40-0.70
Si (%) 0.17-0.37 <=0.50
Ni (%) Not specified <=0.30
Mo (%) Not specified 0.90-1.10
S (%) Not specified <=0.035
P (%) Not specified <=0.035
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property GOST 801 ShKh15 IS 4367 10Cr9Mo10
Tensile Strength 750-950 MPa 410-590 MPa
Yield Strength 450 MPa min 245 MPa min
Elongation 8% min >=18%
Hardness 60-66 HRC Not specified
Izod Impact Not specified 55 J min
Hardness (soft annealed) Not specified <=187 HB
Condition Not specified Normalised and tempered, ruling section up to 50 mm
Typical Applications
GOST 801 ShKh15
Used for ball bearings, roller bearings, races, bearing rings, and precision rollers.
IS 4367 10Cr9Mo10
Not documented
Key Differences
Can GOST 801 ShKh15 Be Substituted With IS 4367 10Cr9Mo10?
GOST 801 ShKh15 and IS 4367 10Cr9Mo10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
GOST 801 ShKh15
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 6600–7000 mm (259.84–275.59 in)
IS 4367 10Cr9Mo10
No active listings currently.
On M-EX Right Now
GOST 801 ShKh15
2 active listings and RFQs →
IS 4367 10Cr9Mo10
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between GOST 801 ShKh15 and IS 4367 10Cr9Mo10?
IS 4367 10Cr9Mo10 specifies Ni, Mo, S, P which are not specified for GOST 801 ShKh15.
Can GOST 801 ShKh15 be substituted with IS 4367 10Cr9Mo10?
GOST 801 ShKh15 and IS 4367 10Cr9Mo10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.