Post Stock Login Register

IS 1570 (Part 5) X80Cr20Si2Ni1 vs EN 10088-1 X6CrNi17-1

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

IS 1570 (Part 5) X80Cr20Si2Ni1 (IS 1570 (Part 5):1985) and EN 10088-1 X6CrNi17-1 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. IS 1570 (Part 5) X80Cr20Si2Ni1 is defined under Bureau of Indian Standards (IS), originating from India, while EN 10088-1 X6CrNi17-1 is defined under European Standard (EN), originating from Europe.

As per chemical composition, IS 1570 (Part 5) X80Cr20Si2Ni1 vs EN 10088-1 X6CrNi17-1 is a 71.1% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With IS 1570 (Part 5) X80Cr20Si2Ni1:
GOST 5632 12Kh13 GB/T 3280 06Cr19Ni10 EN 10088-1 1.4006 EN 10088-1 1.4301 GOST 5632 06Kh23N28 EN 10088-1 1.4401 EN 10088-1 1.4845 GOST 5632 08X18H10 IS 1570 (Part 7) 12Cr13H ASTM A959 .- IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH
Match Breakdown
CHEMISTRY MATCH
71.1%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property IS 1570 (Part 5) X80Cr20Si2Ni1 EN 10088-1 X6CrNi17-1
Standard IS 1570 (Part 5):1985 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) 0.75-0.85 <=0.08
Si (%) 1.75-2.25 <=1.00
Mn (%) 0.20-0.60 <=1.00
P (%) <=0.045 <=0.040
S (%) <=0.030 <=0.015
Cr (%) 19.0-21.0 16.0-18.0
Ni (%) 1.20-1.70 1.20-1.60
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 1570 (Part 5) X80Cr20Si2Ni1 EN 10088-1 X6CrNi17-1
Hardness 255-306 HB Not specified
Condition Valve steel, hardened and tempered (Table 6) Not specified
Can IS 1570 (Part 5) X80Cr20Si2Ni1 Be Substituted With EN 10088-1 X6CrNi17-1?
IS 1570 (Part 5) X80Cr20Si2Ni1 and EN 10088-1 X6CrNi17-1 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
IS 1570 (Part 5) X80Cr20Si2Ni1
0 active listings and RFQs →
EN 10088-1 X6CrNi17-1
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 1570 (Part 5) X80Cr20Si2Ni1 and EN 10088-1 X6CrNi17-1?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can IS 1570 (Part 5) X80Cr20Si2Ni1 be substituted with EN 10088-1 X6CrNi17-1?
IS 1570 (Part 5) X80Cr20Si2Ni1 and EN 10088-1 X6CrNi17-1 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.