Post Stock Login Register

IS 1570 (Part 6) T90V2 vs IS 1570 (Part 6) 103T3

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

IS 1570 (Part 6) T90V2 (IS 1570 (Part 6):1996) and IS 1570 (Part 6) 103T3 (IS 1570 (Part 6):1996) are both steel grades. Both fall under the Tool & Die Steels category. IS 1570 (Part 6) T90V2 is defined under Bureau of Indian Standards (IS), originating from India, while IS 1570 (Part 6) 103T3 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, IS 1570 (Part 6) T90V2 vs IS 1570 (Part 6) 103T3 is a 70.7% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With IS 1570 (Part 6) T90V2:
GOST 5950 4H5MFS EN ISO 4957 1.2316 EN ISO 683-17 100Cr6 GB/T 1299 4Cr5MoSiV1 DIN EN ISO 4957 1.2344 GB/T 1299 3Cr2W8V GOST 5950 3H2W8F GOST 5950 4H5MFS1 DIN EN ISO 4957 1.2379 IS 1570 (Part 6) 133T3 GB/T 1299 4Cr5MoSiV IS 1570 (Part 6) 70T3
Match Breakdown
CHEMISTRY MATCH
70.7%
MECHANICAL MATCH
No shared data
OVERALL
35%
Specifications
Property IS 1570 (Part 6) T90V2 IS 1570 (Part 6) 103T3
Standard IS 1570 (Part 6):1996 IS 1570 (Part 6):1996
Category Tool & Die Steels Tool & Die Steels
C (%) 0.85-0.95 0.95-1.10
Si (%) 0.10-0.35 0.10-0.30
Mn (%) <=0.40 <=0.40
V (%) 0.15-0.30 Not specified
P (%) <=0.035 <=0.035
S (%) <=0.035 <=0.035
Cr (%) Not specified <=0.20
Cu (%) Not specified <=0.25
Ni (%) Not specified <=0.25
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Key Differences
Can IS 1570 (Part 6) T90V2 Be Substituted With IS 1570 (Part 6) 103T3?
IS 1570 (Part 6) T90V2 and IS 1570 (Part 6) 103T3 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
IS 1570 (Part 6) T90V2
0 active listings and RFQs →
IS 1570 (Part 6) 103T3
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 1570 (Part 6) T90V2 and IS 1570 (Part 6) 103T3?
IS 1570 (Part 6) T90V2 specifies V which is not specified for IS 1570 (Part 6) 103T3. IS 1570 (Part 6) 103T3 specifies Cr, Cu, Ni which are not specified for IS 1570 (Part 6) T90V2.
Can IS 1570 (Part 6) T90V2 be substituted with IS 1570 (Part 6) 103T3?
IS 1570 (Part 6) T90V2 and IS 1570 (Part 6) 103T3 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.