Post Stock Login Register

IS 1570 (Part 7) Fe410H vs EN 10028-2 P235GH

Related Material — 67.1% match based on chemical composition and mechanical property overlap.

IS 1570 (Part 7) Fe410H (IS 1570 (Part 7):1992) and EN 10028-2 P235GH (EN 10028-2:2017) are both steel grades. Both fall under the Carbon Steel category. IS 1570 (Part 7) Fe410H is typically used for boilers, pressure vessels, steam turbines, steam and water piping and other power plant equipment working at elevated temperature, while EN 10028-2 P235GH is commonly used for flat products for pressure purposes. IS 1570 (Part 7) Fe410H is defined under Bureau of Indian Standards (IS), originating from India, while EN 10028-2 P235GH is defined under European Standard (EN), originating from Europe.

As per chemical composition, IS 1570 (Part 7) Fe410H vs EN 10028-2 P235GH is a 76.7% match. As per mechanical properties, the match is 47.9%. Combined, this makes them a related material overall at 67.1%.

Frequently Compared With IS 1570 (Part 7) Fe410H:
BS 970 (Part 1) 040A10 BS 970 (Part 3) 070M55 BS 970 (Part 1) 045A10 BS 970 (Part 1) 055M15 BS 970 (Part 3) 045A10 BS 970 (Part 3) 045M10 BS 970 (Part 1) 040A12 BS 970 (Part 1) 045A10 BS 970 (Part 1) 045M10 BS 970 (Part 1) 045M10 BS 970 (Part 1) 060A32 BS 970 (Part 1) 040A04
Match Breakdown
CHEMISTRY MATCH
76.7%
MECHANICAL MATCH
47.9%
OVERALL
67.1%
Specifications
Property IS 1570 (Part 7) Fe410H EN 10028-2 P235GH
Standard IS 1570 (Part 7):1992 EN 10028-2:2017
Category Carbon Steel Carbon Steel
C (%) <=0.20 <=0.16
Si (%) 0.10-0.35 <=0.35
Mn (%) 0.50-1.30 0.60-1.20
P (%) <=0.03 <=0.025
S (%) <=0.03 <=0.010
Cr (%) <=0.25 <=0.30
Ni (%) <=0.30 <=0.30
Mo (%) <=0.10 <=0.08
Cu (%) <=0.30 <=0.30
Nb (%) Not specified <=0.030
Al (%) Not specified >=0.020
N (%) Not specified <=0.012
Ti (%) Not specified <=0.03
V (%) Not specified <=0.02
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 1570 (Part 7) Fe410H EN 10028-2 P235GH
Tensile Strength 410-520 MPa 360-480 MPa
Yield Strength >=225 MPa (0.2 % proof stress) >=235 MPa
Elongation >=24% >=24%
Condition Plate, quadrangular seamless pipe, N, thickness over 3 to 16 (first row of Table 3) Usual delivery condition normalized (+N), nominal thickness up to 16 mm; transverse direction, Yield Strength is ReH, Elongation is A
Typical Applications
IS 1570 (Part 7) Fe410H
Boilers, pressure vessels, steam turbines, steam and water piping and other power plant equipment working at elevated temperature
EN 10028-2 P235GH
Flat products for pressure purposes
Key Differences
Can IS 1570 (Part 7) Fe410H Be Substituted With EN 10028-2 P235GH?
IS 1570 (Part 7) Fe410H and EN 10028-2 P235GH share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
IS 1570 (Part 7) Fe410H
0 active listings and RFQs →
EN 10028-2 P235GH
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 1570 (Part 7) Fe410H and EN 10028-2 P235GH?
EN 10028-2 P235GH specifies Nb, Al, N, Ti which are not specified for IS 1570 (Part 7) Fe410H.
Can IS 1570 (Part 7) Fe410H be substituted with EN 10028-2 P235GH?
IS 1570 (Part 7) Fe410H and EN 10028-2 P235GH share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.