Post Stock Login Register

IS 2062 E350A vs IS 2062 E350B0

Strong Match — 100% match based on chemical composition and mechanical property overlap.

IS 2062 E350A (IS 2062:2011) and IS 2062 E350B0 (IS 2062:2011) are both steel grades. Both fall under the Structural Steel category. IS 2062 E350A is typically used for heavy structural work, machinery bases, bridges, while IS 2062 E350B0 is commonly used for structural work: welded, bolted and riveted structures and general engineering purposes. IS 2062 E350A is defined under Bureau of Indian Standards (IS), originating from India, while IS 2062 E350B0 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, IS 2062 E350A vs IS 2062 E350B0 is a 100% match. As per mechanical properties, the match is 100%. Combined, this makes them a strong match overall at 100%.

Frequently Compared With IS 2062 E350A:
AS/NZS 3679.1 300 GOST 19281 09G2S AS/NZS 3679.1 350 CSA G40.21 400W CSA G40.21 300W CSA G40.21 260W CSA G40.21 480W CSA G40.21 350W IS 2062 E250B0 CSA G40.21 400A ASTM A1008 SS Grade 50 IS 2062 E250A
Match Breakdown
CHEMISTRY MATCH
100%
MECHANICAL MATCH
100%
OVERALL
100%
Specifications
Property IS 2062 E350A IS 2062 E350B0
Standard IS 2062:2011 IS 2062:2011
Category Structural Steel Structural Steel
C (%) <=0.20 <=0.20
Mn (%) <=1.55 <=1.55
Si (%) <=0.45 <=0.45
S (%) <=0.045 <=0.045
P (%) <=0.045 <=0.045
CEV (%) <=0.47 <=0.47
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 2062 E350A IS 2062 E350B0
Tensile Strength >=490 MPa >=490 MPa
Yield Strength 350 MPa (<=20mm) / 330 MPa (20-40mm) / 320 MPa (>40mm) 350 MPa (<=20mm) / 330 MPa (20-40mm) / 320 MPa (>40mm)
Elongation >=22% >=22%
Impact not required Not specified
Impact Energy Not specified >=27 J at 0°C
Typical Applications
IS 2062 E350A
Heavy structural work, machinery bases, bridges
IS 2062 E350B0
Structural work: welded, bolted and riveted structures and general engineering purposes
Can IS 2062 E350A Be Substituted With IS 2062 E350B0?
IS 2062 E350A and IS 2062 E350B0 overlap closely enough on chemistry and mechanical properties that IS 2062 E350B0 is often considered as a substitute for IS 2062 E350A in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
Forms & Sizes Available on M-EX
IS 2062 E350A
Plate → (7 listings)
Thickness: 10–12 mm (0.39–0.47 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2500–3800 mm (98.43–149.61 in)
Angle → (6 listings)
Leg 1: 65–100 mm (2.56–3.94 in)
Leg 2: 65–75 mm (2.56–2.95 in)
Thickness: 5–8 mm (0.2–0.31 in)
IS 2062 E350B0
No active listings currently.
On M-EX Right Now
IS 2062 E350A
13 active listings and RFQs →
IS 2062 E350B0
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 2062 E350A and IS 2062 E350B0?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can IS 2062 E350A be substituted with IS 2062 E350B0?
IS 2062 E350A and IS 2062 E350B0 overlap closely enough on chemistry and mechanical properties that IS 2062 E350B0 is often considered as a substitute for IS 2062 E350A in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.