Post Stock Login Register

IS 2062 E410A vs CSA G40.21 480W

Related Material — 64.5% match based on chemical composition and mechanical property overlap.

IS 2062 E410A (IS 2062:2011) and CSA G40.21 480W (CSA G40.21-13 (R2023)) are both steel grades. Both fall under the Structural Steel category. IS 2062 E410A is typically used for high strength structural applications, while CSA G40.21 480W is commonly used for heavy cranes, offshore structures, high-rise building frames, pressure vessels, heavy mining equipment.. IS 2062 E410A is defined under Bureau of Indian Standards (IS), originating from India, while CSA G40.21 480W is defined under Canadian Standards Association (CSA), originating from Canada.

As per chemical composition, IS 2062 E410A vs CSA G40.21 480W is a 96.7% match. As per mechanical properties, the match is 0%. Combined, this makes them a related material overall at 64.5%.

Frequently Compared With IS 2062 E410A:
AS/NZS 3679.1 350 CSA G40.21 400W CSA G40.21 350W CSA G40.21 260W CSA G40.21 300W CSA G40.21 400A GOST 19281 09G2S AS/NZS 3679.1 300 IS 2062 E250B0 IS 2062 E250A ASTM A1008 SS Grade 50 ASTM A1008 SS Grade 80
Match Breakdown
CHEMISTRY MATCH
96.7%
MECHANICAL MATCH
0%
OVERALL
64.5%
Specifications
Property IS 2062 E410A CSA G40.21 480W
Standard IS 2062:2011 CSA G40.21-13 (R2023)
Category Structural Steel Structural Steel
C (%) <=0.20 max 0.23
Mn (%) <=1.60 max 1.7
Si (%) <=0.45 max 0.5
S (%) <=0.045 max 0.035
P (%) <=0.045 max 0.035
CEV (%) <=0.50 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 2062 E410A CSA G40.21 480W
Tensile Strength >=540 MPa 590-790 MPa
Yield Strength 410 MPa (<=20mm) / 390 MPa (20-40mm) / 380 MPa (>40mm) 480 MPa min
Elongation >=20% Not specified
Impact not required Not specified
Typical Applications
IS 2062 E410A
High strength structural applications
CSA G40.21 480W
Heavy cranes, offshore structures, high-rise building frames, pressure vessels, heavy mining equipment.
Key Differences
Can IS 2062 E410A Be Substituted With CSA G40.21 480W?
IS 2062 E410A and CSA G40.21 480W share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
IS 2062 E410A
Plate → (8 listings)
Thickness: 8–10 mm (0.31–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2500–4100 mm (98.43–161.42 in)
Angle → (6 listings)
Leg 1: 50–130 mm (1.97–5.12 in)
Leg 2: 130–6000 mm (5.12–236.22 in)
Thickness: 6–8 mm (0.24–0.31 in)
CSA G40.21 480W
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2900–3000 mm (114.17–118.11 in)
On M-EX Right Now
IS 2062 E410A
14 active listings and RFQs →
CSA G40.21 480W
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 2062 E410A and CSA G40.21 480W?
IS 2062 E410A specifies CEV which is not specified for CSA G40.21 480W.
Can IS 2062 E410A be substituted with CSA G40.21 480W?
IS 2062 E410A and CSA G40.21 480W share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.