Strong Match — 91.4% match
based on chemical composition and mechanical property overlap.
IS 4432 C10 (IS 4432:1967) and IS 11169 (Part 1) 5C4 (IS 11169 (Part 1):1984) are both steel grades.
Both fall under the Carbon Steel category.
IS 4432 C10 is typically used for bolts, nuts, shafts, pins, general engineering parts, structural components, welded assemblies, while IS 11169 (Part 1) 5C4 is commonly used for cold heading and cold extrusion; the standard covers wires, wire rods and bars of 2 to 100 mm diameter (clause 1.1).
IS 4432 C10 is defined under Bureau of Indian Standards (IS), originating from India, while IS 11169 (Part 1) 5C4 is defined under Bureau of Indian Standards (IS), originating from India.
As per chemical composition, IS 4432 C10 vs IS 11169 (Part 1) 5C4 is a 87% match.
As per mechanical properties, the match is 100%.
Combined, this makes them a strong match overall at 91.4%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Cold heading and cold extrusion; the standard covers wires, wire rods and bars of 2 to 100 mm diameter (clause 1.1)
Key Differences
IS 4432 C10 specifies Si, S, P which are not specified for IS 11169 (Part 1) 5C4.
Can IS 4432 C10 Be Substituted With IS 11169 (Part 1) 5C4?
IS 4432 C10 and IS 11169 (Part 1) 5C4 overlap closely enough on chemistry and mechanical properties that IS 11169 (Part 1) 5C4 is often considered as a substitute for IS 4432 C10 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between IS 4432 C10 and IS 11169 (Part 1) 5C4?
IS 4432 C10 specifies Si, S, P which are not specified for IS 11169 (Part 1) 5C4.
Can IS 4432 C10 be substituted with IS 11169 (Part 1) 5C4?
IS 4432 C10 and IS 11169 (Part 1) 5C4 overlap closely enough on chemistry and mechanical properties that IS 11169 (Part 1) 5C4 is often considered as a substitute for IS 4432 C10 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.