IS 6603 X02Cr22Ni5Mo3N vs EN 10088-3 X2CrNiMoN22-5-3
Close Alternative — 83.3% match
based on chemical composition and mechanical property overlap.
IS 6603 X02Cr22Ni5Mo3N (IS 6603:2024) and EN 10088-3 X2CrNiMoN22-5-3 (EN 10088-3:2014) are both steel grades.
Both fall under the Stainless Steel category.
IS 6603 X02Cr22Ni5Mo3N is typically used for general purposes, semi-finished products, bars, wire rods and bright bars, while EN 10088-3 X2CrNiMoN22-5-3 is commonly used for general purposes, semi-finished products, bars, rods, wire, sections and bright products.
IS 6603 X02Cr22Ni5Mo3N is defined under Bureau of Indian Standards (IS), originating from India, while EN 10088-3 X2CrNiMoN22-5-3 is defined under European Standard (EN), originating from Europe.
As per chemical composition, IS 6603 X02Cr22Ni5Mo3N vs EN 10088-3 X2CrNiMoN22-5-3 is a 100% match.
As per mechanical properties, the match is 50%.
Combined, this makes them a close alternative overall at 83.3%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
IS 6603 X02Cr22Ni5Mo3N
EN 10088-3 X2CrNiMoN22-5-3
Tensile Strength
>=650 MPa
650-880 MPa
Yield Strength
>=450 MPa
>=450 MPa
Elongation
>=25%
>=25%
Hardness
<=290 HB
<=270 HB
Condition
Solution annealed, conditions 1C, 1E, 1D, 1X, 1G and 2D, thickness or diameter up to 160 mm; Tensile Strength is a minimum as printed, hardness for guidance only
Solution annealed (+AT), conditions 1C, 1E, 1D, 1X, 1G and 2D, thickness or diameter up to 160 mm; Yield Strength is Rp0.2, Elongation is A (longitudinal), hardness for guidance only
Typical Applications
IS 6603 X02Cr22Ni5Mo3N
General purposes, semi-finished products, bars, wire rods and bright bars
EN 10088-3 X2CrNiMoN22-5-3
General purposes, semi-finished products, bars, rods, wire, sections and bright products
Can IS 6603 X02Cr22Ni5Mo3N Be Substituted With EN 10088-3 X2CrNiMoN22-5-3?
IS 6603 X02Cr22Ni5Mo3N and EN 10088-3 X2CrNiMoN22-5-3 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
What is the difference between IS 6603 X02Cr22Ni5Mo3N and EN 10088-3 X2CrNiMoN22-5-3?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can IS 6603 X02Cr22Ni5Mo3N be substituted with EN 10088-3 X2CrNiMoN22-5-3?
IS 6603 X02Cr22Ni5Mo3N and EN 10088-3 X2CrNiMoN22-5-3 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.