Post Stock Login Register

IS 6603 X02Cr25Ni7Mo4N vs ASTM A959 S32520

Strong Match — 88.8% match based on chemical composition and mechanical property overlap.

IS 6603 X02Cr25Ni7Mo4N (IS 6603:2024) and ASTM A959 S32520 (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. IS 6603 X02Cr25Ni7Mo4N is typically used for general purposes, semi-finished products, bars, wire rods and bright bars, while ASTM A959 S32520 is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). IS 6603 X02Cr25Ni7Mo4N is defined under Bureau of Indian Standards (IS), originating from India, while ASTM A959 S32520 is defined under ASTM International, originating from United States.

As per chemical composition, IS 6603 X02Cr25Ni7Mo4N vs ASTM A959 S32520 is a 88.8% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 88.8%.

Frequently Compared With IS 6603 X02Cr25Ni7Mo4N:
IS 1570 (Part 7) 12Cr12MoH GOST 5632 08X18H10 ASTM A959 2507 GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
88.8%
MECHANICAL MATCH
No shared data
OVERALL
88.8%
Specifications
Property IS 6603 X02Cr25Ni7Mo4N ASTM A959 S32520
Standard IS 6603:2024 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) <=0.030 <=0.030
Si (%) <=1.00 <=0.80
Mn (%) <=2.00 <=1.50
P (%) <=0.035 <=0.035
S (%) <=0.015 <=0.020
Cr (%) 24.0-26.0 24.0-26.0
Mo (%) 3.0-4.5 3.0-5.0
Ni (%) 6.0-8.0 5.5-8.0
N (%) 0.24-0.35 0.20-0.35
Cu (%) Not specified 0.50-3.00
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 6603 X02Cr25Ni7Mo4N ASTM A959 S32520
Tensile Strength >=730 MPa Not specified
Yield Strength >=530 MPa Not specified
Elongation >=25% Not specified
Hardness <=290 HB Not specified
Condition Solution annealed, conditions 1C, 1E, 1D, 1X, 1G and 2D, thickness or diameter up to 160 mm; Tensile Strength is a minimum as printed, hardness for guidance only Not specified
Typical Applications
IS 6603 X02Cr25Ni7Mo4N
General purposes, semi-finished products, bars, wire rods and bright bars
ASTM A959 S32520
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can IS 6603 X02Cr25Ni7Mo4N Be Substituted With ASTM A959 S32520?
IS 6603 X02Cr25Ni7Mo4N and ASTM A959 S32520 overlap closely enough on chemistry and mechanical properties that ASTM A959 S32520 is often considered as a substitute for IS 6603 X02Cr25Ni7Mo4N in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
IS 6603 X02Cr25Ni7Mo4N
0 active listings and RFQs →
ASTM A959 S32520
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 6603 X02Cr25Ni7Mo4N and ASTM A959 S32520?
ASTM A959 S32520 specifies Cu which is not specified for IS 6603 X02Cr25Ni7Mo4N.
Can IS 6603 X02Cr25Ni7Mo4N be substituted with ASTM A959 S32520?
IS 6603 X02Cr25Ni7Mo4N and ASTM A959 S32520 overlap closely enough on chemistry and mechanical properties that ASTM A959 S32520 is often considered as a substitute for IS 6603 X02Cr25Ni7Mo4N in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.