Post Stock Login Register

IS 6911 X10Cr17Mn6Ni4N20 vs EN 10088-1 X12CrMnNiN17-7-5

Strong Match — 92.4% match based on chemical composition and mechanical property overlap.

IS 6911 X10Cr17Mn6Ni4N20 (IS 6911:1992) and EN 10088-1 X12CrMnNiN17-7-5 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. IS 6911 X10Cr17Mn6Ni4N20 is defined under Bureau of Indian Standards (IS), originating from India, while EN 10088-1 X12CrMnNiN17-7-5 is defined under European Standard (EN), originating from Europe.

As per chemical composition, IS 6911 X10Cr17Mn6Ni4N20 vs EN 10088-1 X12CrMnNiN17-7-5 is a 92.4% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 92.4%.

Frequently Compared With IS 6911 X10Cr17Mn6Ni4N20:
ASTM A959 201 ASTM A959 202 ASTM A959 205 GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH GOST 5632 08X18H10 EN 10088-1 1.4006
Match Breakdown
CHEMISTRY MATCH
92.4%
MECHANICAL MATCH
No shared data
OVERALL
92.4%
Specifications
Property IS 6911 X10Cr17Mn6Ni4N20 EN 10088-1 X12CrMnNiN17-7-5
Standard IS 6911:1992 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) <=0.20 <=0.15
Cr (%) 16.0-18.0 16.0-18.0
Mn (%) 4.0-8.0 5.5-7.5
N (%) 0.05-0.20 0.05-0.25
Ni (%) 3.5-5.5 3.5-5.5
P (%) <=0.045 <=0.045
S (%) <=0.030 <=0.015
Si (%) <=1.0 <=1.00
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property IS 6911 X10Cr17Mn6Ni4N20 EN 10088-1 X12CrMnNiN17-7-5
Bend Test (180 deg) Not required Not specified
Elongation (50 mm, annealed) >=40% Not specified
Hardness (annealed, max) 217 HBS, 95 HRB Not specified
Tensile Strength (annealed) >=640 MPa Not specified
Yield Strength (0.2% proof, annealed) >=300 MPa Not specified
Typical Applications
IS 6911 X10Cr17Mn6Ni4N20
Stainless and heat-resisting steel plate, sheet and strip (clause 1.1)
EN 10088-1 X12CrMnNiN17-7-5
Not documented
Can IS 6911 X10Cr17Mn6Ni4N20 Be Substituted With EN 10088-1 X12CrMnNiN17-7-5?
IS 6911 X10Cr17Mn6Ni4N20 and EN 10088-1 X12CrMnNiN17-7-5 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X12CrMnNiN17-7-5 is often considered as a substitute for IS 6911 X10Cr17Mn6Ni4N20 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
IS 6911 X10Cr17Mn6Ni4N20
0 active listings and RFQs →
EN 10088-1 X12CrMnNiN17-7-5
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between IS 6911 X10Cr17Mn6Ni4N20 and EN 10088-1 X12CrMnNiN17-7-5?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can IS 6911 X10Cr17Mn6Ni4N20 be substituted with EN 10088-1 X12CrMnNiN17-7-5?
IS 6911 X10Cr17Mn6Ni4N20 and EN 10088-1 X12CrMnNiN17-7-5 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X12CrMnNiN17-7-5 is often considered as a substitute for IS 6911 X10Cr17Mn6Ni4N20 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.