Post Stock Login Register

JIS G4104 SCr415 vs IS 1570 (Part 4) 105Cr5

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

JIS G4104 SCr415 (JIS G 4104:1979) and IS 1570 (Part 4) 105Cr5 (IS 1570 (Part 4):1988) are both steel grades. Both fall under the Alloy Steel category. JIS G4104 SCr415 is defined under Japanese Industrial Standards (JIS), originating from Japan, while IS 1570 (Part 4) 105Cr5 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, JIS G4104 SCr415 vs IS 1570 (Part 4) 105Cr5 is a 80.7% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With JIS G4104 SCr415:
NF A35-565 100C6 UNI 11234 100Cr6 GOST 4543 12HN3A GB/T 3077 12Cr2Ni4A IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 10Cr20Mo6 IS 4367 10Cr9Mo10 IS 4367 07Cr4Mo6 IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 7) 10Cr36Mo10H EN 10028-2 10CrMo9-10
Match Breakdown
CHEMISTRY MATCH
80.7%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property JIS G4104 SCr415 IS 1570 (Part 4) 105Cr5
Standard JIS G 4104:1979 IS 1570 (Part 4):1988
Category Alloy Steel Alloy Steel
C (%) 0.13–0.18 0.90-1.20
Si (%) 0.15–0.35 0.10-0.35
Mn (%) 0.60–0.90 0.40-0.80
Cr (%) 0.90–1.20 1.00-1.60
P (%) ≤0.030 Not specified
S (%) ≤0.030 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property JIS G4104 SCr415 IS 1570 (Part 4) 105Cr5
Tensile Strength ≥735 MPa Not specified
Case Hardness HRC 56–62 Not specified
Typical Applications
JIS G4104 SCr415
Case hardened gears, cams, pins
IS 1570 (Part 4) 105Cr5
Not documented
Key Differences
Can JIS G4104 SCr415 Be Substituted With IS 1570 (Part 4) 105Cr5?
JIS G4104 SCr415 and IS 1570 (Part 4) 105Cr5 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
JIS G4104 SCr415
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 5600–5700 mm (220.47–224.41 in)
IS 1570 (Part 4) 105Cr5
No active listings currently.
On M-EX Right Now
JIS G4104 SCr415
2 active listings and RFQs →
IS 1570 (Part 4) 105Cr5
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between JIS G4104 SCr415 and IS 1570 (Part 4) 105Cr5?
JIS G4104 SCr415 specifies P, S which are not specified for IS 1570 (Part 4) 105Cr5.
Can JIS G4104 SCr415 be substituted with IS 1570 (Part 4) 105Cr5?
JIS G4104 SCr415 and IS 1570 (Part 4) 105Cr5 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.