Minimal Match — 49.5% match
based on chemical composition and mechanical property overlap.
JIS G4104 SCr415 (JIS G 4104:1979) and UNI 11234 100Cr6 (UNI 11234:2007) are both steel grades.
Both fall under the Alloy Steel category.
JIS G4104 SCr415 is typically used for case hardened gears, cams, pins, while UNI 11234 100Cr6 is commonly used for ball bearings,roller bearings,needle bearings,dies,punches,gauges,wear resistant components.
JIS G4104 SCr415 is defined under Japanese Industrial Standards (JIS), originating from Japan, while UNI 11234 100Cr6 is defined under Ente Nazionale Italiano di Unificazione (UNI), originating from Italy.
As per chemical composition, JIS G4104 SCr415 vs UNI 11234 100Cr6 is a 74.3% match.
As per mechanical properties, the match is 0%.
Combined, this makes them a minimal match overall at 49.5%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Can JIS G4104 SCr415 Be Substituted With UNI 11234 100Cr6?
JIS G4104 SCr415 and UNI 11234 100Cr6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between JIS G4104 SCr415 and UNI 11234 100Cr6?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can JIS G4104 SCr415 be substituted with UNI 11234 100Cr6?
JIS G4104 SCr415 and UNI 11234 100Cr6 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.