Post Stock Login Register

JIS G4303 SUS304 vs ASTM A276/A276M S30453

Close Alternative — 74% match based on chemical composition and mechanical property overlap.

JIS G4303 SUS304 (JIS G4303:2021) and ASTM A276/A276M S30453 (ASTM A276/A276M:2017) are both steel grades. Both fall under the Stainless Steel category. JIS G4303 SUS304 is typically used for food equipment, chemical vessels, architectural applications, while ASTM A276/A276M S30453 is commonly used for stainless steel bars and shapes (hot-finished or cold-finished). JIS G4303 SUS304 is defined under Japanese Industrial Standards (JIS), originating from Japan, while ASTM A276/A276M S30453 is defined under ASTM International, originating from United States.

As per chemical composition, JIS G4303 SUS304 vs ASTM A276/A276M S30453 is a 77.6% match. As per mechanical properties, the match is 66.7%. Combined, this makes them a close alternative overall at 74%.

Frequently Compared With JIS G4303 SUS304:
EN 10088-1 1.4845 EN 10088-1 1.4301 GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 GB/T 3280 06Cr19Ni10 EN 10088-1 1.4401 GOST 5632 12Kh13 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH ASTM A959 .- IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
77.6%
MECHANICAL MATCH
66.7%
OVERALL
74%
Specifications
Property JIS G4303 SUS304 ASTM A276/A276M S30453
Standard JIS G4303:2021 ASTM A276/A276M:2017
Category Stainless Steel Stainless Steel
C (%) ≤0.08 <=0.030
Si (%) ≤1.00 <=1.00
Mn (%) ≤2.00 <=2.00
Cr (%) 18.0–20.0 18.0-20.0
Ni (%) 8.0–10.5 8.0-11.0
P (%) ≤0.045 <=0.045
S (%) ≤0.030 <=0.030
N (%) Not specified 0.10-0.16
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property JIS G4303 SUS304 ASTM A276/A276M S30453
Tensile Strength ≥520 MPa >=515 MPa
Yield Strength ≥205 MPa >=205 MPa
Elongation ≥40% >=40%
Hardness ≤187 HB Not specified
Condition Not specified Condition A (Annealed), hot-finished, all sizes (first row printed)
Typical Applications
JIS G4303 SUS304
Food equipment, chemical vessels, architectural applications
ASTM A276/A276M S30453
Stainless steel bars and shapes (hot-finished or cold-finished)
Key Differences
Can JIS G4303 SUS304 Be Substituted With ASTM A276/A276M S30453?
JIS G4303 SUS304 and ASTM A276/A276M S30453 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
Forms & Sizes Available on M-EX
JIS G4303 SUS304
Sheet → (3 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2500–4000 mm (98.43–157.48 in)
ASTM A276/A276M S30453
No active listings currently.
On M-EX Right Now
JIS G4303 SUS304
3 active listings and RFQs →
ASTM A276/A276M S30453
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between JIS G4303 SUS304 and ASTM A276/A276M S30453?
ASTM A276/A276M S30453 specifies N which is not specified for JIS G4303 SUS304.
Can JIS G4303 SUS304 be substituted with ASTM A276/A276M S30453?
JIS G4303 SUS304 and ASTM A276/A276M S30453 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.