Post Stock Login Register

JIS G4305 SUS405 vs ASTM A959 S40800

Strong Match — 89.7% match based on chemical composition and mechanical property overlap.

JIS G4305 SUS405 (JIS G4305:2012) and ASTM A959 S40800 (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. JIS G4305 SUS405 is typically used for cold-rolled stainless steel plates, sheet and strip, while ASTM A959 S40800 is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). JIS G4305 SUS405 is defined under Japanese Industrial Standards (JIS), originating from Japan, while ASTM A959 S40800 is defined under ASTM International, originating from United States.

As per chemical composition, JIS G4305 SUS405 vs ASTM A959 S40800 is a 89.7% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 89.7%.

Frequently Compared With JIS G4305 SUS405:
GOST 5632 08X18H10 EN 10088-1 1.4301 ASTM A959 .- GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo
Match Breakdown
CHEMISTRY MATCH
89.7%
MECHANICAL MATCH
No shared data
OVERALL
89.7%
Specifications
Property JIS G4305 SUS405 ASTM A959 S40800
Standard JIS G4305:2012 ASTM A959:2011
Category Stainless Steel Stainless Steel
C (%) <=0.08 <=0.08
Si (%) <=1.00 <=1.00
Mn (%) <=1.00 <=1.00
P (%) <=0.040 <=0.045
S (%) <=0.030 <=0.045
Cr (%) 11.50-14.50 11.5-13.0
Ni (%) <=0.60 <=0.80
Al (%) 0.10-0.30 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property JIS G4305 SUS405 ASTM A959 S40800
Tensile Strength >=410 MPa Not specified
Yield Strength >=175 MPa Not specified
Elongation >=20% Not specified
Hardness <=183 HB Not specified
Condition Annealed plate and strip; proof strength applies only when specified by the purchaser Not specified
Typical Applications
JIS G4305 SUS405
Cold-rolled stainless steel plates, sheet and strip
ASTM A959 S40800
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can JIS G4305 SUS405 Be Substituted With ASTM A959 S40800?
JIS G4305 SUS405 and ASTM A959 S40800 overlap closely enough on chemistry and mechanical properties that ASTM A959 S40800 is often considered as a substitute for JIS G4305 SUS405 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
JIS G4305 SUS405
0 active listings and RFQs →
ASTM A959 S40800
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between JIS G4305 SUS405 and ASTM A959 S40800?
JIS G4305 SUS405 specifies Al which is not specified for ASTM A959 S40800.
Can JIS G4305 SUS405 be substituted with ASTM A959 S40800?
JIS G4305 SUS405 and ASTM A959 S40800 overlap closely enough on chemistry and mechanical properties that ASTM A959 S40800 is often considered as a substitute for JIS G4305 SUS405 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.