Post Stock Login Register

JIS G4305 SUS405 vs JIS G4304 SUS410S

Strong Match — 88% match based on chemical composition and mechanical property overlap.

JIS G4305 SUS405 (JIS G4305:2012) and JIS G4304 SUS410S (JIS G4304:2021) are both steel grades. Both fall under the Stainless Steel category. JIS G4305 SUS405 is typically used for cold-rolled stainless steel plates, sheet and strip, while JIS G4304 SUS410S is commonly used for hot-rolled stainless steel plates and strips. JIS G4305 SUS405 is defined under Japanese Industrial Standards (JIS), originating from Japan, while JIS G4304 SUS410S is defined under Japanese Industrial Standards (JIS), originating from Japan.

As per chemical composition, JIS G4305 SUS405 vs JIS G4304 SUS410S is a 94.4% match. As per mechanical properties, the match is 75%. Combined, this makes them a strong match overall at 88%.

Frequently Compared With JIS G4305 SUS405:
GOST 5632 08X18H10 EN 10088-1 1.4301 GOST 5632 06Kh23N28 EN 10088-1 1.4006 EN 10088-1 1.4401 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo ASTM A959 .- GB/T 3280 06Cr19Ni10 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
94.4%
MECHANICAL MATCH
75%
OVERALL
88%
Specifications
Property JIS G4305 SUS405 JIS G4304 SUS410S
Standard JIS G4305:2012 JIS G4304:2021
Category Stainless Steel Stainless Steel
C (%) <=0.08 <=0.08
Si (%) <=1.00 <=1.00
Mn (%) <=1.00 <=1.00
P (%) <=0.040 <=0.040
S (%) <=0.030 <=0.030
Cr (%) 11.50-14.50 11.50-13.50
Ni (%) <=0.60 <=0.60
Al (%) 0.10-0.30 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property JIS G4305 SUS405 JIS G4304 SUS410S
Tensile Strength >=410 MPa >=410 MPa
Yield Strength >=175 MPa >=205 MPa
Elongation >=20% >=20%
Hardness <=183 HB <=183 HB
Condition Annealed plate and strip; proof strength applies only when specified by the purchaser Annealed plate and strip; proof strength applies only when specified by the purchaser
Typical Applications
JIS G4305 SUS405
Cold-rolled stainless steel plates, sheet and strip
JIS G4304 SUS410S
Hot-rolled stainless steel plates and strips
Key Differences
Can JIS G4305 SUS405 Be Substituted With JIS G4304 SUS410S?
JIS G4305 SUS405 and JIS G4304 SUS410S overlap closely enough on chemistry and mechanical properties that JIS G4304 SUS410S is often considered as a substitute for JIS G4305 SUS405 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
JIS G4305 SUS405
0 active listings and RFQs →
JIS G4304 SUS410S
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between JIS G4305 SUS405 and JIS G4304 SUS410S?
JIS G4305 SUS405 specifies Al which is not specified for JIS G4304 SUS410S.
Can JIS G4305 SUS405 be substituted with JIS G4304 SUS410S?
JIS G4305 SUS405 and JIS G4304 SUS410S overlap closely enough on chemistry and mechanical properties that JIS G4304 SUS410S is often considered as a substitute for JIS G4305 SUS405 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.