Post Stock Login Register

JIS G4305 SUS436L vs EN 10088-1 1.4301

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

JIS G4305 SUS436L (JIS G4305:2012) and EN 10088-1 1.4301 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. JIS G4305 SUS436L is typically used for cold-rolled stainless steel plates, sheet and strip, while EN 10088-1 1.4301 is commonly used for food equipment, chemical vessels, architectural, kitchenware. JIS G4305 SUS436L is defined under Japanese Industrial Standards (JIS), originating from Japan, while EN 10088-1 1.4301 is defined under European Standard (EN), originating from Europe.

As per chemical composition, JIS G4305 SUS436L vs EN 10088-1 1.4301 is a 54.2% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With JIS G4305 SUS436L:
ASTM A959 .- EN 10088-1 1.4845 ASTM A959 29-4C GOST 5632 06Kh23N28 GOST 5632 08X18H10 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo GB/T 3280 06Cr19Ni10 EN 10088-1 1.4006 EN 10088-1 1.4401 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
54.2%
MECHANICAL MATCH
0%
OVERALL
35%
Specifications
Property JIS G4305 SUS436L EN 10088-1 1.4301
Standard JIS G4305:2012 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) <=0.025 ≤0.07
Si (%) <=1.00 ≤1.00
Mn (%) <=1.00 ≤2.00
P (%) <=0.040 ≤0.045
S (%) <=0.030 ≤0.030
Cr (%) 16.00-19.00 17.5–19.5
Mo (%) 0.75-1.50 Not specified
N (%) <=0.025 Not specified
Ni (%) <=0.60 8.0–10.5
Ti (%) <=0.80 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property JIS G4305 SUS436L EN 10088-1 1.4301
Tensile Strength >=410 MPa ≥520 MPa
Yield Strength >=245 MPa ≥210 MPa
Elongation >=20% ≥45%
Hardness <=217 HB ≤215 HB
Condition Annealed plate and strip; proof strength applies only when specified by the purchaser Not specified
Typical Applications
JIS G4305 SUS436L
Cold-rolled stainless steel plates, sheet and strip
EN 10088-1 1.4301
Food equipment, chemical vessels, architectural, kitchenware
Key Differences
Can JIS G4305 SUS436L Be Substituted With EN 10088-1 1.4301?
JIS G4305 SUS436L and EN 10088-1 1.4301 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
JIS G4305 SUS436L
No active listings currently.
EN 10088-1 1.4301
Sheet → (3 listings)
Thickness: 6–6 mm (0.24–0.24 in)
Width: 1250–1250 mm (49.21–49.21 in)
Length: 2500–3300 mm (98.43–129.92 in)
On M-EX Right Now
JIS G4305 SUS436L
0 active listings and RFQs →
EN 10088-1 1.4301
3 active listings and RFQs →
Frequently Asked Questions
What is the difference between JIS G4305 SUS436L and EN 10088-1 1.4301?
JIS G4305 SUS436L specifies Mo, N, Ti which are not specified for EN 10088-1 1.4301.
Can JIS G4305 SUS436L be substituted with EN 10088-1 1.4301?
JIS G4305 SUS436L and EN 10088-1 1.4301 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.