Related Material — 58.8% match
based on chemical composition and mechanical property overlap.
UNS C51000 and UNS C52100 are both bronze grades.
Both fall under the Bronze Alloys category.
UNS C51000 is defined under Unified Numbering System (UNS), originating from United States, while UNS C52100 is defined under Unified Numbering System (UNS), originating from United States.
As per chemical composition, UNS C51000 vs UNS C52100 is a 85.3% match.
As per mechanical properties, the match is 5.9%.
Combined, this makes them a related material overall at 58.8%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
UNS C51000
UNS C52100
Yield Strength
~275-350 MPa (H04 hard)
~500-585 MPa (H02 half-hard)
Tensile Strength
~415-485 MPa (H04 hard)
~650-800 MPa (H02 half-hard)
Elongation
~15-25% (H04 hard)
~8-18% (H02 half-hard)
Note
Phosphor bronze 5% Sn, values for H04 hard temper
Phosphor bronze 8% Sn, values for H02 half-hard temper, common spring stock
Can UNS C51000 Be Substituted With UNS C52100?
UNS C51000 and UNS C52100 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between UNS C51000 and UNS C52100?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can UNS C51000 be substituted with UNS C52100?
UNS C51000 and UNS C52100 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.