Minimal Match — 23.4% match
based on chemical composition and mechanical property overlap.
UNS C51000 and UNS C61300 are both bronze grades.
Both fall under the Bronze Alloys category.
UNS C51000 is defined under Unified Numbering System (UNS), originating from United States, while UNS C61300 is defined under Unified Numbering System (UNS), originating from United States.
As per chemical composition, UNS C51000 vs UNS C61300 is a 35.1% match.
As per mechanical properties, the match is 0%.
Combined, this makes them a minimal match overall at 23.4%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
UNS C51000
UNS C61300
Yield Strength
~275-350 MPa (H04 hard)
~345 MPa (HR50 drawn+stress-relieved)
Tensile Strength
~415-485 MPa (H04 hard)
~550 MPa (HR50 drawn+stress-relieved)
Elongation
~15-25% (H04 hard)
~30% (HR50 drawn+stress-relieved)
Note
Phosphor bronze 5% Sn, values for H04 hard temper
Aluminium bronze, values for HR50 drawn and stress-relieved temper, consistent with C63000 convention
Key Differences
UNS C61300 specifies Ni, Al, Mn, Si which are not specified for UNS C51000.
Can UNS C51000 Be Substituted With UNS C61300?
UNS C51000 and UNS C61300 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between UNS C51000 and UNS C61300?
UNS C61300 specifies Ni, Al, Mn, Si which are not specified for UNS C51000.
Can UNS C51000 be substituted with UNS C61300?
UNS C51000 and UNS C61300 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.